User manual KYOSHO GP 4WD FW-06

[. . . ] Shortcut to Anti-Afterimage Instructions Do not use a damaged power cord or plug or a damaged or loose power outlet. · Otherwise, this may result in electric shock or fire. Do not touch the power plug with wet hands when removing or plugging the plug into the outlet. · Otherwise, this may result in electric shock. Make sure to connect the power cord to a grounded power outlet. · Otherwise, it may result in electric shock or personal injury. Safety Instructions Ensure that the power plug is plugged into the power outlet firmly and correctly. [. . . ] If Auto Lamp Control is adjusted, Manual Lamp Control will automatically switch to Off. z Ambient Light: Ambient Light detects ambient light intensity and automatically adjusts the screen brightness of all the LFDs in the same serial chain. Tool Settings 1 2 3 4 1 Security Panel Control Turn on or off the screen of a display device. Remote Control Enable or disable the remote control. 2 Reset Reset Picture Reset the screen settings. Reset All Reset the screen, sound and system settings at the same time. 3 Edit Column Select the items you want to display in the list of sets. 4 Information View the program information. Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. Move the arrow to customize the size of the program window. Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. 1 2 Right-click and select Group>Edit in the display device list section on the left side of the program window. In the Edit Group window displayed, click Add on the sub level or Add on the same level. z Add on the sub level: Create a sub-group under the selected group. z Add on the same level: Create a group on the same level as the selected group. The Add on the same level button is enabled only if at least one group is created. 3 1 2 Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. 3 1 2 Click Yes. The group will be deleted. Renaming Groups Select a group name, and click Edit. In the Edit Group window displayed, click Rename. 3 If a cursor appears in the old group name, enter a new group name. Schedule Management Creating Schedules Create and register a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled in the middle. 2 Click the Add button. The Add Schedule window will appear. 3 Click Add below the Device Group item, and select the group you want to add a schedule to. 4 Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. z Device Group: Select a group. · · · PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort DVI : PC AV : PC Adjusting the LCD Display · · HDMI : PC DisplayPort : PC Size Changes the Size of the PIP window. Note Size will be changed to <16:9> when <PIP> is <On>. Position Changes the Position of the PIP window. Transparency Adjusts the Transparency of PIP windows. · · · · High Medium Low Opaque Adjusting the LCD Display Edit Name Name the input device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game /Camcorder / DVD Combo / DHR / PC / DVI PC / DVI Devices Note · · The displayed devices differ depending on the external input mode. However, since 640x480, 720P (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal. When using a DVI to HDMI cable connection (which does not support audio and video at the same time), the audio port should be connected via a separate audio cable. When a PC is connected, set Edit Name to DVI PC to enjoy the video and audio from the connected PC. When an AV device is connected, set Edit Name to DVI Device to enjoy the video and audio from the connected AV device. · Source AutoSwitch Settings Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Note · · If the display TV source is active (TV tuner connected to the display) the Source AutoSwitch search function becomes inactive. Source AutoSwitch selection and PIP function: If the Source AutoSwitch selection is set to On, the PIP function will not work, the Source AutoSwitch selection must be set to Off, for the PIP feature to work. When the Source AutoSwitch selection is On, and or the Primary Source Recovery is On, the display power saving mode becomes inactive. [. . . ] The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz. Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. [. . . ]