User manual LG GS-3159-AEHZ1

[. . . ] 3. During pairing, the LED indicator flashes green and red alternately. 4. When pairing is complete, the LED indicator goes off and the 3D glasses are ready to use. 5. It is unnecessary to pair the 3D glasses with the same 3D TV again. 2. After the green LED indicator flashes three times, the glasses are ready to pair. [. . . ] 4. Place your 3D glasses within the recommended pairing distance and turn them on. 5. During pairing, the LED indicator flashes green and red alternately. 6. When pairing is complete, the LED indicator goes off and pairing with the second 3D TV is complete. 2 !NOTE ▶▶The 3D glasses detect the unique ID of the TV within the recommended pairing distance; a pair of 3D glasses cannot detect more than one TV. ▶▶If you want to connect the glasses to another TV, see "Re-syncing the Glasses. " USING 3D GLASSES Button Operation LED Indicator The red LED indicator flashes once. If you turn the power on again, the 3D glasses detect the TV with the strongest signal. Power On Power Off Auto Off*1 Battery discharge Re-syncing the Glasses *1 Press and hold the power button for one to two seconds. Press and hold the power button for one to two seconds until the LED indicator turns red. The product is automatically turned off if there is no 3D signal for more than one minute. - ENGLISH Press the power button for at least eight seconds. The Auto Off function automatically turns the power off when there is no signal between the TV and glasses for more than one minute. You cannot watch 3D images when the Auto Off function automatically turns the power off. This may result in discoloration and cracks and cause the coating on the lenses to peel off. Make sure to shake off any dust before using it. 13 14 15 Do not scratch the surface of the lenses with sharp objects or wipe them with chemicals. Do not drop, bend, or allow the glasses to come into contact with other objects. (For more information, refer to the owner's manual of the TV. ) If you are out of the reception range, images may not appear in 3D. Flickering may occur when watching 3D images under a magnetic fluorescent light (50 Hz) due to interference between the 3D glasses (60 Hz) and the light. If you encounter this issue, turn off the light and continue watching. This product is a wireless communications device that uses the 2. 4 GHz frequency. It may be affected by interference from another device, such as a microwave oven or wireless LAN. Wireless performance may also be affected by a physical barrier between the TV and the glasses. They should stop using the glasses if they experience fatigue, twitching of the eye or face muscles or other involuntary movements. [. . . ] They should stop using the glasses if they experience fatigue, twitching of the eye or face muscles or other involuntary movements. Do not use the 3D glasses with the nose pad if you are not wearing regular eyeglasses. Use a coin cell battery with the same specifications as the one provided. When replacing the battery, make sure to insert it with the polarity (+, -) in the right direction. [. . . ]