User manual LG HBS-250

[. . . ] Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. [. . . ] The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. Note: You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p. [1080i] Outputs 1080 lines of interlaced video. 1080p Display Mode When the resolution is set to 1080p, select [24Hz] for smooth presentation of film material (1080/24p) with a HDMI-equipped display compatible with 1080/24p input. Notes: When you select [24Hz], you may experience some picture disturbance when the video switches video and film material. Even when [1080p Display Mode] is set to [24Hz], if your TV is not compatible with 1080/24p, the actual frame frequency of the video output will be 50Hz or 60Hz to match the video source format. [RGB] Select when connecting to a RGB display device. 21 HBS-250-DD. BHUNLL_ENG_6412 4/29/09 6:08 PM Page 22 [LANGUAGE] Menu [AUDIO] Menu Display Menu Select a language for the [Setup] menu and on-screen display. Disc Menu / Disc Audio / Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. Use number buttons then ENTER to enter the corresponding 4-digit number according to the language code list on page 45. Note: Depending on a disc, your language setting may not work for some disc. Speaker Setup To obtain the best possible sound, use the Speaker Setup display to specify the volume of the speakers you have connected and their distance from your listening position. Not all BDROM discs are compatible. How to check the network configuration Select [IP Mode] option and check the Network status indicator shown above the menu. (The Network status indicator changes according to Network configuration. ) Able to use network Testing Network Unable to use network IP Setting This option is available only if [IP Mode] option is set to [Static IP]. Use the v / V / b / B buttons to select a field; use the number buttons to enter a value. BD-LIVE connection You can restrict Internet access when BD-Live functions are used. [Partially permitted] Internet access is permitted only for BD-Live contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-Live contents without a certificate. [Prohibited] Internet access is prohibited for all BD-Live contents. IP Mode If there is a DHCP server on the local area network (LAN), this player will automatically be allocated an IP address. If you're using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function, select [Dynamic IP]. If there is no DHCP server on the network and you want to set the IP address manually, select [Static IP] then set the [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using [IP Setting] option. " will 25 HBS-250-DD. BHUNLL_ENG_6412 4/29/09 6:08 PM Page 26 [OTHERS] Menu DivX Registration Code DivX is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX Ultra Certified device that plays DivX video. [. . . ] Select the correct input mode of the audio receiver so you can listen to the sound from the player. Operate the Remote Control closer to the player. No sound. The equipment connected with the audio cable is not set to receive disc signal output. The power of the equipment connected with the audio cable is turned off. The player is in reverse play, fast forward, slow motion or pause mode. The player does not start playback. The disc is upside down. [. . . ]