User manual LG L1942PM-SS

[. . . ] Keep children from dropping or pushing objects into the display's cabinet openings. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. A1 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. [. . . ] User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product. Power Cord Audio signal Analog signal Digital signal Wall-outlet type PC-outlet type Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. DVI-D (This feature is not available in all countries. ) 2. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. A7 Control Panel Functions Front Panel Controls Control Function Use this button to enter or exit from the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that these settings are not inadvertently changed. To lock the OSD settings, press and hold the MENU button for several seconds. You can unlock the OSD settings at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" appears. MENU Button A8 Control Panel Functions Control Buttons Function Use these buttons to select or adjust functions in the On Screen Display. Use these buttons to select or adjust functions in the On Screen Display. buttons to decrease or increase the speaker AUTO/SET Button Use this button to select an icon in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button prior to entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is: 17 inch: 1280x1024 19 inch: 1280x1024 Power Button Use this button to turn the display on or off. Power Indicator This Indicator lights up as blue when the display is operating normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator changes to flicker. A9 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: Press the MENU Button, then the main menu of the OSD appears. When the icon you want becomes highlighted, press the AUTO/SET Button. Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD. A10 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. NOTE The order of icons may differ depending on the model (A11~A17). A11 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. PICTURE COLOR POSITION Main Menu TRACKING SETUP MENU : Exit : Adjust (Decrease/Increase) SET : Enter Menu Name : Select another sub-menu : Restart to select sub-menu Button Tip Menu Name Icons Sub-menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. A12 On Screen Display(OSD) Selection and Adjustment Main menu PICTURE Sub menu Description PICTURE BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. [. . . ] · Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www. lge. com. · Make sure to check if the video card supports Plug&Play function. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? A20 Specifications Display 17 inches (43. 2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 43. 2 cm 0. 264 mm pixel pitch Horizontal Freq. Input Form Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital 17 inch Sync Input Video Input Signal Input Input Form 15 pin D-Sub Connector DVI - D connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz VESA 1280 x 1024 @60 Hz : 32 W(Typ. ) 1W 1W Resolution Max Recommend Plug&Play Power Consumption Dimensions &Weight DDC 2B (Digital), DDC 2AB (Analog) On Mode Sleep Mode Off Mode Width Height Depth Net With Stand Without Stand 36. 96 cm / 14. 55 inches 36. 96 cm / 14. 55 inches 40. 83 cm / 16. 07 inches 31. 51 cm / 12. 41 inches 51. 83 cm / 20. 41 inches 24. 16 cm / 9. 51 inches 5. 60 cm / 2. 20 inches 4. 07 kg (9. 04 lbs) Tilt Range Power Input Environmental Conditions Tilt -6°~17° AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Attached( Attached( ), Detached ( O ) ), Detached ( O ) Stand Base Signal cable Power cord Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without notice. A21 Specifications Display 19 inches (48. 2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 48. 2 cm 0. 294 mm pixel pitch Horizontal Freq. [. . . ]