User manual LG VF5718CNB

[. . . ] When you vacuum with an attachment appliance that has a rotating brush roller: · Do not reach into the running brush roller. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. · Children should be supervised to ensure that they do not play with the appliance. [. . . ] Remove the wand off the body by grasping and rotating while pulling up. 2) Set pile height to high 3) Place switch in "Floor" mode. -8- Dusting brush: Functions as a dusting brush, also an upholstery nozzle which is useful for furniture, shelves etc. Attach as shown. Mini-nozzle (option) Mini-nozzle is attached as shown and used for stairs and other hard to reach places. To remove Mini-nozzle cover: Remove 2 screws on the bottom and take Mininozzle cover off as shown. Crevice tool: Crevice tool is attached as shown and used for corners, between cushions etc. Press Frequently check and remove hair, string, and lint build-up the brush area. To extend wand: Rotate the wand to unlock and pull. Lock Unlock Note : For added reach the dusting brush can be used with crevice tool as shown. Pull CAUTION Do not pull the vacuum cleaner around the room by the hose. Property damage could result. TO STORE ATTACHMENTS Return the wand to its position on the body and the attachments to their holders. -9- PERFORMANCE FEATURES Motor protector This vacuum has a motor protector bypass valve which automatically opens to provide cooling air to the motor when a clog prevents the normal flow of air to the motor. If the bypass valve opens to prevent motor overheating and possible damage to the vacuum, you will notice a change of sound as air rushes through the valve opening. NOTE: The motor protector may open when using attachments or when cleaning new carpet, due to reduced airflow caused by the attachments themselves or by new carpet fiber filling the dust bin quickly. Thermal protector This vacuum has a thermal protector which automatically trips to protect the vacuum from overheating. If a clog prevents the normal flow of air to the motor the thermal protector turns the motor off automatically to allow the motor to cool in order to prevent possible damage to the vacuum. To correct problem: If this occurs, turn the vacuum off and unplug the power cord from the outlet to allow the vacuum to cool. Wait approximately thirty(30)minutes and plug the vacuum in and turn back on to see if the motor protector has reset. The thermal protector system will not reset untill the vacuum has cooled down. Motor protector -10- Always follow all safety precautions when cleaning and servicing the vacuum cleaner. VACUUM CLEANER CARE WARNING Electrical shock and personal injury hazard. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting. VACUUM STORAGE To store the vacuum cleaner when it is not used, assemble its cord and return its telescopic handle to its lower space saving position. WARNING Electrical shock and personal injury hazard. Wrapping the cord too tightly puts stress on the cord and can cause cord damage. TO CLEAN EXHAUST FILTER Remove exhaust filter from vacuum and clean the filter in cold water only. DO NOT USE DETERGENT AND SOAP. CAUTION Wet filter can cause permanent damage to cleaner. [. . . ] Additional service needed, other than those described in this owner's manual, should be performed at an authorized LG Electronics Service agency. WARNING Electrical shock and personal injury hazard. PROBLEM CLEANER WILL NOT RUN POOR DUST COLLECTION POSSIBLE CAUSE 1. Turn off the vacuum and reattach the dust bin in the correct position. DUST ESCAPES THE DUST BIN 1. [. . . ]