User manual LG W1953S-PF

[. . . ] To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. Keep children from dropping or pushing objects into the display's cabinet openings. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. [. . . ] When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. A6 Connecting the Display Using the cable holder (This feature is not available in all models. ) OPEN Cable holder 1 OPEN 2 4 3 EN OP A7 Control Panel Functions Front Panel Controls 1 2 3 4 5 6 7 8 Control Function Use this button to enter CINEMA MODE, AUTO BRIGHT, TIME CONTROL, LIVE SENSOR, SMART items, for more information, refer to page A16. Use this button to enter EZ ZOOMING, 4:3 IN WIDE, PHOTO EFFECT items, for more information, refer to page A17-A18. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that these settings are not inadvertently changed. To lock the OSD settings, press and hold the MENU button for several seconds. You can unlock the OSD settings at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" appears. Button Button MENU Button A8 Control Panel Functions Control Function Use these buttons to select or adjust functions in the On Screen Display. ) Buttons Button ( AUTO/SET Button Use this button to select an icon in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button prior to entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is: W1953S: 1360 x 768 W2053S: 1600 x 900 W2253S: 1920 x1080 Power Button Use this button to turn the display on or off. Power Indicator This Indicator lights up as red when the display is operating normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to flicker. Light sensor This is lens for light sensor sletect outside luminance, when setting AUTO BRIGHT ON. A9 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: Press the MENU Button, then the main menu of the OSD appears. When the icon you want becomes highlighted, press the AUTO/SET Button. Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD. A10 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu CINEMA MODE AUTO BRIGHT TIME CONTROL LIVE SENSOR SMART EZ ZOOMING 4:3 IN WIDE NORMAL Sub-menu A Reference To focus on the moving picture selected To control screen brightness automatically To mind user using time To control touch key distance To control smart key menu To adjust the resolution To adjust the image size PHOTO EFFECT GAUSSIAN BLUR SEPIA MONOCHROME BRIGHTNESS CONTRAST GAMMA sRGB PRESET 6500K 9300K To adjust screen color mode PICTURE To adjust the brightness, contrast and gamma of the screen COLOR RED GREEN BLUE HORIZONTAL VERTICAL To costomize the color of the screen To adjust the position of the screen TRACKING CLOCK PHASE SHARPNESS LANGUAGE HORIZONTAL OSD POSITION VERTICAL WHITE BALANCE POWER INDICATOR FACTORY RESET MOVIE INTERNET USER NORMAL DEMO To improve the clarity and stability of the screen SETUP To costomize the screen status for a user's operating environment FLATRON F-ENGINE To select or customize desired image settings : Adjustable A : Analog Input NOTE The order of icons may differ depending on the model (A11~A19 ). A11 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Activate this function when white and black colors are present in the screen. MENU : Exit : Adjust : Adjust SET : Select another sub-menuPOWER INDICATOR Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set ON at any time, the power indicator will automatically be turned on. FACTORY RESET Restore all factory default settings except "LANGUAGE. " Press the , buttons to reset immediately. If this does not improve the screen image, restore the factory default settings. This function will be enabled only when the input signal is an analog signal. A15 On Screen Display(OSD) Selection and Adjustment The OSD screen will appear when you touch the smart button on the right bottom of the monitor. Main menu Sub menu CINEMA MODE Description It focuses better on the moving picture in selected area. *This function is operated only if the fortemanager is installed to pc. AUTO BRIGHT If select on, it automatically controls the brightness of display to best suit the surrounding working environment, providing the optimal viewing condition and maximized user convenience. Selection:OFF/1HOUR/2HOUR TIME CONTROL LIVE SENSOR This function turns on the button LED for pushing comfortable. When detect the presence of users hand before touch it. SMART To adjust AUTO BRIGHT, TIME CONTROL, LIVE SENSOR. [. . . ] ·Set the color setting higher than 24 bits (true color) at Control Panel -Settings . · Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. The screen blinks. Have you installed the display driver? Have you installed the display driver?· Be sure to install the display driver from the display driver CD (or diskette)that comes with your display. Or, you can also download the driver from our web site:http://www. lge. com. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? · Make sure to check if the video card supports Plug&Play function. A22 Specifications Display W1953S 18. 5 inches (47. 0 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 47. 0 cm 0. 300*0. 300 mm pixel pitch Horizontal Freq. Input Form Signal Input Input Form Max Recommend DDC 2AB On Mode Sleep Mode Off Mode : 22W(Typ. ) 1W 1W 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) 15 pin D-Sub Connector RGB Analog (0. 7 Vp-p/ 75 ohm) VESA 1360 x 768 @ 60 Hz VESA 1360 x 768 @60 Hz Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight Tilt Range Power Input Environmental Conditions With Stand Without Stand Width 45. 15 cm / 17. 77 inches 45. 15 cm / 17. 77 inches Height 35. 74 cm / 14. 07 inches 29. 72 cm / 11. 70 inches Depth 19. 80 cm / 7. 79 inches 5. 85 cm / 2. 30 inches Net 3. 45 kg (7. 60 lbs) Tilt -5°~ 15° AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type Stand Base Power cord NOTE Information in this document is subject to change without notice. A23 Specifications Display W2053S 20 inches (50. 8 cm) Flat Panel Active matrix-TFT LCD, AntiGlare coating Visible diagonal size: 50. 8 cm 0. 0922(H)*0. 2766(V) mm pixel pitch Horizontal Freq. [. . . ]