User manual LG W2242P-SS

[. . . ] Keep children from dropping or pushing objects into the display's cabinet openings. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. A1 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. [. . . ] C Connect Dsub Cable (Mac) User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product. Power Cord Analog signal Digital signal DVI D-sub Wall-outlet type PC PC-outlet type PC B MAC c Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) Dsub VGA connector on the supplied cable to a 15 pin 2 row connector. PC A DVI-D(This feature is not available in all countries. ) 2. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. A7 Control Panel Functions Front Panel Controls Control 4:3 in Wide Function To select the image size of the screen. WIDE 4:3 · WIDE : Switch to full screen mode according to input image signal. · 4 : 3 : Change the image signal ratio into 4:3. MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. A8 Control Panel Functions Control Buttons Function Use these buttons to select or adjust functions in the On Screen Display. For more information, refer to page A16. Use this button to make D-Sub or DVI connector active. The default setting is D-Sub. AUTO/SET Button Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is - W1942P : 1440 x 900 - W2042P/W2242P : 1680 x 1050 Power Button Use this button to turn the display on or off. This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. Power Indicator A9 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: MENU AUTO/SET MENU Press the MENU Button, then the main menu of the OSD appears. When the icon you want becomes highlighted, press the AUTO/SET Button. Push the MENU Button once to return to the main menu to select another function. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Use this function to set the power indicator on the front side of the monitor to ON or OFF. [. . . ] Or, you can also download the driver from our web site: http://www. lge. com. · Make sure to check if the video card supports Plug&Play function. G Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? A19 Specifications Display W1942P 19 inches (48. 1 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 48. 1 cm 0. 285*0. 285 mm pixel pitch Horizontal Freq. Input Form Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) 15 pin D-Sub Connector DVI - D Connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Analog : VESA 1440 x 900 @ 75 Hz Digital : VESA 1440 x 900 @ 60 Hz VESA 1440 x 900 @60 Hz : 36W(Typ. ) 1W 1W Sync Input Video Input Signal Input Input Form Resolution Max Recommend Plug&Play Power Consumption Dimensions & Weight DDC 2B On Mode Sleep Mode Off Mode Width Height Tilt Range Power Input Environmental Conditions With Stand Without Stand 44. 84 cm / 20. 30 inches 44. 84 cm / 20. 30 inches 40. 14 cm / 15. 80 inches 30. 06 cm / 11. 83 inches 51. 14 cm / 20. 13 inches Depth 24. 16 cm / 9. 51 inches 5. 84 cm / 2. 29 inches Net 4. 5 kg (10 lbs) Tilt -6°~ 17° AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type Stand Base Power cord NOTE Information in this document is subject to change without notice. A20 Specifications Display W2042P 20. 1 inches (51. 1 cm) Flat Panel Active matrix-TFT LCD AntiGlare coating Visible diagonal size: 51. 1 cm 0. 258*0. 258 mm pixel pitch Horizontal Freq. Input Form Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green), Digital (HDCP) 15 pin D-Sub Connector DVI - D connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Analog : VESA 1680 x 1050 @60 Hz Digital : VESA 1680 x 1050 @60 Hz VESA 1680 x 1050 @60 Hz : 40W(Typ. ) 1W 1W Sync Input Video Input Signal Input Input Form Resolution Max Recommend Plug&Play Power Consumption Dimensions & Weight DDC 2B On Mode Sleep Mode Off Mode Width Height Depth Net With Stand Without Stand 47. 39 cm / 18. 65 inches 47. 39 cm / 18. 65 inches 40. 99 cm / 16. 31 inches 31. 89 cm / 12. 55 inches 51. 99 cm / 20. 46 inches 24. 16 cm / 9. 51 inches 5. 84 cm / 2. 29 inches 4. 64 kg (10. 31 lbs) -6°~ 17° Tilt Range Power Input Environmental Conditions Tilt AC 100-240V~ 50/60Hz 1. 0A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type Stand Base Power cord NOTE Information in this document is subject to change without notice. A21 Specifications Display W2242P 22 inches (55. 8 cm) Flat Panel Active matrix-TFT LCD, AntiGlare coating Visible diagonal size: 55. 8 cm 0. 282*0. 282 mm pixel pitch Horizontal Freq. [. . . ]