User manual LIEBHERR CP 3813 COMFORT

[. . . ] More infor- W By moving the bottle and jar holder, you can prevent bottles from tipping over when the door is opened and closed. W The shelves* can be adjusted according to height of frozen food, fig. - Always insert shelves with the raised edge at the back pointing upwards, otherwise food may freeze onto the rear wall. A4: If you need space for large bottles and containers, then simply push the front half of glass shelf 1 back. [. . . ] W Condensation may form on the outside of the refrigerator/ freezer during periods of high humidity. WKeep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appliance on fire. If live parts or the mains lead become damp this may cause short circuits. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions. Risk of injury and danger of damage as a result of incorrect transport!Power supply (AC) and voltage at the operating point must comply with the details on the rating plate. which is located on the inside left of the appliance, next to the vegetable bins. W Connect the appliance with a properly earthed fused plug and socket only. W The socket must be fused with a 10 A fuse or higher, it must be away from the rear of the appliance and must be easily accessible. W Do not connect the appliance to the supply with other equipment using a distribution outlet - risk of overheating. W When removing the mains cable from the back of the appliance, remove the cable holder as well so as to avoid vibration noise. W Keep packaging materials away from children - polythene sheets and bags can cause suffocation!However, after about 6 seconds the electronics automatically switch back to energy-saving normal operation. If the lamp does not light up when the door is opened briefly, but the temperature setting display does, the light bulb may be defective. Replacing the bulb: W Light-bulb specifications: max. 15 W, power supply and voltage should match the details on the rating plate. W Attach the cover at the rear again and lock into place on sides. SuperCool*, Fig. A1/5 The interior light In normal operation, the actual cooling temperature is shown. The display will flash: - if you change the temperature W If "F 1" to "F 5" appears in the display, the appliance has a fault. Consult the customer service department indicat-ing the fault number displayed as this will tell the techni-cian what kind of irregularity has occurred. - The illuminated temperature setting display indicates operation of the appliance. Temperature setting display, Fig. A1/1 * according to Model and design 11 W Due to the natural circulation of air in the refrigerator, different temperature areas are set, which are suitable for storing different types of food. - Immediately above the vegetable bins and on the rear wall is the coldest (e. g. suitable for sausages and meat products); - In the top front area and in the door is the warmest (e. g. [. . . ] W Ensure that none of the wires or other components are dislodged, bent or damaged. If the appliance is to be left switched off for any length of time, empty the appliance, disconnect from the mains, clean as described above and leave the door open so as to avoid odours. If none of the above causes applies and you cannot eliminate the fault yourself or if more than one LED is GB flashing, please contact your nearest after-sales service point (see list attached). Please state the Appliance name 1, Service 2, Appliance number 3 of the rating plate with (see Fig. ), and which LED indicators are flashing. The rating plate is located inside the appliance on the left-hand side. Customer service and type plate Troubleshooting Your appliance is designed and manufactured in such a way as to provide fault. free operation and a long service life. [. . . ]