User manual LIEBHERR ECBN 5066 PREMIUMPLUS BIOFRESH NOFROST

[. . . ] • When disconnecting the appliance, pull on the plug, not on the cable. • Any repairs and work on the appliance should only be carried out by the customer service department, as unauthor­sed work could prove i highly dangerous for the user. • Do not allow naked flames or ignition sources to enter the appliance. When transporting and cleaning the appliance ensure that the refrigerant circuit is not damaged. In the event of damage, make sure that there are no ignition sources nearby and keep the room well ventilated. [. . . ] The appliance will change back to normal operation. The child lock is designed to protect the appliance from being switched off accidentally. = Child lock Activating the child lock SuperCool • Activate setup mode by touching the SuperFrost icon for 5 seconds. - The LED is lit and the child lock is activated. Touching the SuperCool icon switches the refrigerator compartment to maximum cooling. It is recommended particularly if you wish to cool large quantities of food, drinks, freshly baked goods or meals rapidly. Switching on: touch the SuperCool icon briefly so that the LED comes on. After approximately six hours, however, the refrigerator switches back automatically to normal energy-saving operation. LED • Exit setup mode by touching the freezer compartment On/Off icon. Deactivating the child lock • Activate setup mode by touching the SuperFrost icon for 5 seconds. The child lock is deactivated. • Exit setup mode by touching the freezer compartment On/Off icon. 18 After the water filter has been changed, the waterdrop symbol on the display must be reset. = Confirm water filter change GB The temperature in the BioFresh drawers may be changed. = Set BioFresh temperature Resetting the drop symbol Setting the BioFresh temperature • Activate setup mode by touching the S ­ uperFrost icon for 5 seconds. • Touch the freezer compartment Down icon until appears in the display. • Exit setup mode by touching the freezer compartment On/Off icon. • Activate setup mode by touching the ­ SuperFrost icon for 5 seconds. - The display reads • Touch the freezer compartment Up/Down icons and set 6 - 9 to increase the temperature (warmer), 4 - 1 to reduce the temperature. appears in For values b4 - b1, the temperature in the drawers can drop to below 0°C. Important: the ice maker will not eject the ice cubes of its tray if the bin has been removed. Ice cube bin Ice maker Space for freezing and storage The ice cube bin in the upper drawer is intended for ice cubes only. Humidity selection Freezing Fresh food should be frozen to the core as rapidly as possible. The maximum amount of food (in kg) which can be frozen in 24 hours is shown on the type plate ("Freezing capacity"). This setting is suitable for dry or wrapped food like dairy products, meat, fish, cold meats. This setting is suitable for storing unwrapped food with a high moisture content such as salad, vegetables and fruit. This amount varies according to the model and climate rating. Notes • The humidity in the compartment depends on the moisture content of the food in it, and the frequency with which the compartment is opened. • Unwrapped animal and vegetable foods should be stored separately in the drawers. If there is not enough space for them to be stored separately, make sure that they are wrapped. Do not allow different types of meat to come into contact with one another but keep them packaged separately so as to avoid premature bacterial spoilage. • The fresher the product and the higher its quality, the longer it will keep. • The following products should not be stored in the BioFresh compartment: hard cheese, potatoes, cold-sensitive vegetables such as cucumbers, aubergines, avocadoes, semiripe tomatoes, zucchini, all cold-sensitive tropical fruits such as pineapples, bananas, grapefruit, melons, mangos, papayas, etc. 22 Freezing with SuperFrost Touch the SuperFrost icon comes on. briefly so that the LED To ensure that the ice maker works properly, the water supply line must be bled. so that the IceMaker LED Bleeding the ice maker GB • For small amounts of frozen food switch on SuperFrost 6 hours beforehand. For the maximum amount (see freezing capacity on the type plate) you will need to switch it on 24 hours beforehand. Depending on the quantity of food placed in the freezer, this will normally be between 30 and max. [. . . ] The ice maker can also be switched on and off using the ON/OFF button on the ice maker housing. so that the IceMaker LED Switching the ice maker off Ice maker Safety instructions and warnings • The ice maker is designed exclusively to make ice cubes in quantities required by a household and may only be operated with water suitable for this purpose. • The first three batches of ice must not be consumed or used. This applies both to using the appliance for the first time and also to using it after it has not been used for a lengthy period of time. This ensures that the water supply is purged. • All repairs and work on the ice maker may only be carried out by customer service personnel or other trained personnel. • The manufacturer cannot accept liability for damage caused by a faulty connection to the mains water supply. • Ensure that the drawer is fully closed, as the ice maker can otherwise not produce ice cubes. • The ice maker will only work if the combined refrigerator-freezer is connected to the electricity supply. [. . . ]