User manual LIEBHERR WTI 2050

[. . . ] Multi-temperature wine cabinet for integrated use, door-on-door Operating and installation instructions 251010 7084026 - 01 WTI . . . 6 Appliance at a glance Contents 1 1. 1 1. 2 1. 3 1. 4 1. 5 2 3 3. 1 3. 2 4 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 5 5. 1 5. 2 5. 3 5. 4 5. 5 5. 6 5. 7 5. 8 5. 9 6 6. 1 6. 2 6. 3 7 8 8. 1 8. 2 9 Appliance at a glance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For 16 mm thick unit walls = 568 mm wide recess: u Let the spacers abut the side wall of the unit. Fig. (Allow for door stop components, such as knobs and sealing lips. ) Fasten the appliance in the recess with screws: u by screwing long Spax screws Fig. 15 For 19 mm thick unit walls = 562 mm wide recess: u Align the front edges of the hinges so as to be flush with the side wall of the unit. Fig. 21 (8)through the centre of the oblong hole in the plastic bracket Fig. 17 In case of units with (16 mm and 19 mm) door stop components (knobs, sealing lips etc. ): u To allow for the extra distance (depth of door stop components): allow the hinges to protrude by the extra distance. Fig. (Distance between appliance door and lower edge of crosspiece) Fig. Lower edge of the assembly aid = top edge of the unit door to be fitted. 23 (12) by undoing the locknuts u Attach the fastening crosspiece Fig. 23 (12): mark a short centre line on the unit door and put the tip of the arrow on the crosspiece above it. 23 (11) for removal, turn them and insert them into the adjacent openings. Fig. Do not allow knobs and sealing lips to contact the door - important for function!For large or sectioned unit doors: u fit a 2nd pair of mounting brackets u Use the holes pre-drilled in the handle area of the appliance door for this purpose. Fig. u To laterally align the unit door: move the unit door in the X direction. u To align the unit door in height Y and in lateral inclination: adjust the adjusting bolt Fig. w The unit door is flush and in alignment with the surrounding unit fronts. u Fix the appliance in the round hole at the bottom with the second screw Fig. 25 Ensure that both metal edges are flush (symbol //): u Drill pilot holes in the door of the unit (possibly make preliminary hole with a bradawl). 28 (24), push it to the limit and then press until it audibly snaps into place. 28 (25) sideways, then draw them forwards with a screwdriver so that they snap into place well. u Attach 5. 1. 1 Adjusting the brightness The brightness is adjustable between h0 (no illumination) and h5 (maximum luminosity). u To set the display brighter: press the Up setting button, upper wine zone Fig. u To set the display darker: press the Down setting button, upper wine zone Fig. [. . . ] u Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse. Fig. 30 (3). 7 Malfunction Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. [. . . ]