User manual MAGIMIX LE BLENDER

[. . . ] If the fitted plug has been cut from the power supply cord, it should be destroyed and replaced with an appropriate three pin plug in accordance with the following code : BLUE : neutral BROWN : live GREEN/YELLOW : earth The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter "N" or coloured BLUE or BLACK. [. . . ] Use the special measuring cap opening for introducing ingredients when the machine is in use. Use speed "1" for all normal blending preparations and use high speed "2" when a fine emulsion is required. To minimize possibility of spillage it is recommended that you limit the volume to one-half pint, completely remove the measuring-cap from the lid (this will allow expanding air present inside jug) and always start blending on lowest speed 1, then progress to desired speed 2. - To protect against electrical hazards, do not immerse the motor base in water or in other liquid. - Do not operate with a damaged cord or plug or after the unit malfunctions. Parts marked "*" are dishwasher safe, others must be hand washed. To clean the motor base, unplug the power cord, wipe the surface with a damp cloth first, then with a dry cloth. You will find a small, square, red plastic button located on the underside of the motor base of some models. [. . . ] We reserve the right to alter at any time without notice the technical specifications of this appliance. [. . . ]