User manual MARANTZ RC5001SR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MARANTZ RC5001SR. We hope that this MARANTZ RC5001SR user guide will be useful to you.


MARANTZ RC5001SR : Download the complete user guide (4554 Ko)

Manual abstract: user guide MARANTZ RC5001SR

Detailed instructions for use are in the User's Guide.

[. . . ] Model SR4001/SR5001 User Guide AV Surround Receiver CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. [. . . ] Select “INPUT SETUP” in SETUP MAIN MENU with 3 or 4 cursor button, and press the ENTER button. 1-1 INPUT SETUP FUNC:MODE :DIG:HDMI:COMP -----------------------TV :AUTO : 3 : : DVD :AUTO : 1 : 1 : 1 VCR1:AUTO : - : : 3 DSS :AUTO : 2 : 2 : 2 AUX1:AUTO : F : : MAIN NEXT EXIT Notes: • When TUNER is fixed to the analog input, you can not select any digital input. € If “DIG” is selected and a DVD, compact disc or LD is fast-forwarded during playback, decoded signals may produce a skipping sound. After you complete this portion of the set up, move the cursor to “NEXT” with the 3 or 4 cursor buttons and then press the ENTER button to go to the next page. € If “NONE” is selected for the Subwoofer setting, then this setting is fixed to “LARGE. SURROUND L/R NONE: Select if no surround left and right speakers are connected. BACK NONE: Select if no surround back left and right speakers are connected. 2CH: Select if the surround back left and right speakers are connected. In this case, the audio signal is emitted form the Surround back L output terminal. Notes: • If “NONE” is selected for the Surround L/R setting, then this setting is fixed to “NONE. € • You can use surround back speaker terminals as multi room speaker terminals when you use no surround back speaker. Note: If “NONE” is selected for the Surround L/R setting, then this setting is not available. LPF/HPF When you use a subwoofer, you can select the cutoff frequency for the small speakers used. Select one of the crossover frequency levels according to the size of the small speaker connected. 80Hz → 100Hz → 120Hz → 150Hz → 180Hz Notes: • If using small front speakers, set a slightly higher frequency. BASS MIX • The bass mix setting is only valid when “LARGE” is set for the front speakers and “YES” is set for the subwoofer during stereo playback . This setting has effect only during playback of PCM or analog stereo sources. € When “BOTH” is selected, the low frequencies will be played through the main L&R, as well as the sub woofer. In this playback mode, the low frequency range expand more uniformly through the room, but depending on the size and shape of the room, interference may result in a decrease of the actual volume of the low frequency range. € By selecting “MIX”, the low frequencies will play through the main L&R only. Note: LFE signals during playback of Dolby Digital or DTS, will be played through the sub woofer. ENGLISH 2 SPEAKER SETUP After you have installed the SR4001/SR5001, connected all the components, and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout. [. . . ] The SURROUND SPEAKER B system can not be operated with the supplied remote controller. The unit enters surround speaker B mode and the “SPKR B” will appear on the display. 47 ENGLISH ENGLISH TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are you operating the unit properly following the user’s guide ? [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MARANTZ RC5001SR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MARANTZ RC5001SR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.