User manual MCINTOSH MVP831

[. . . ] OWNERS MANUAL MVP831 DVD / Video CD / CD Player Manufactured under license from Dolby Laboratories, Dolby, Pro Logic and the doubleD symbol are registered trademark of Dolby Laboratories. This product incorporates copyright protection technology that is protected by method claims of certain U. S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. [. . . ] If instead of Automatic, a specific Subtitle Language is selected, the Subtitle will appear every time, but can be turned off only while that specific disc is played. When a Subtitle option is selected, the Disc Languages menu will reappear. On Screen Menus Language The third submenu choice is On Screen Menu Language. Refer to Figure 7 Note: This feature will function only if the required menu language is encoded on the disc. Disc Languages Menu Preference 1 2 3 4 English French Spanish Other * * * * Press RETURN to cancel Disc Languages Subtitle Preference 1 2 3 4 5 Automatic English French Spanish Other * * * * Figure 7 Press RETURN to cancel Figure 6 If you wish to change the On Screen Menu Language, press 3 to access the Menus Language submenu. When a Menu language is selected, the Disc Languages menu will reappear. After all setup adjustments are complete, press pushbutton Number 0 to exit the Initial Setup Menu. IF you wish to change the Subtitle Language, press 2 to access the subtitle submenu. Press 5 to select another language for Subtitles. 14 SETUP How to Set Ratings How to Set Ratings Most movies made in recent years have ratings to indicate whether they are suitable for children to view. Some DVD Movie discs have encoded rating levels that allow you to set your MVP831 to prevent your children from viewing inappropriate movies in your absence. A password protected lock function, set by you, sets the rating limit for disc play. Note: If a disc is loaded, the player must be in STOP mode before any SETUP operation can occur. and you will not be able to view a DVD Movie with a rating number at or below the selected rating limit number. If you are unable to find or remember the password, please contact your dealer or McIntosh Technical Support. Ratings Enter a 4-digit password, then press SELECT 1. Rating Level 8 allows you to view all DVD movies, regardless of their level rating. Refer to Figure 8. Example: A DVD movie rated PG13 normally will be encoded with a Level 3 rating, however, this rating may not be the same for different movie studios. The player password protected level rating must be set to Level Number 3 or lower to prevent this disc from being viewed unless the password is used to unlock the player. **** Press SELECT to continue Figure 9 Please set a rating limit 8 No Limit 7 6 5 4 3 2 1 0 Lock All Press RETURN to cancel 4. Using the Number pushbuttons, enter a 4-digit password number and press SELECT. The player will be locked and will not play discs with Rating Levels at or below the selected rating limit number unless the correct password number is entered. Press SELECT again and the initial setup menu will reappear. Figure 8 3. Refer to Figure 9. CAUTION: Be absolutely sure to remember or write down the password number and put it in a safe location for future reference. Once the password has been entered, the player is locked to that ratings limit 15 SETUP How to Set Ratings cont and Menu Language Ratings 1 2 3 4 Unlock Player Change Password Change Level Temporary Unlock After all setup adjustments are complete, press pushbutton Number 0 to exit the Initial Setup Menu. How to Set Menu Language This allows you to select the language used for the on screen messages such as PLAY, STOP and the Initial Setup Menu. Note: If a disc is loaded, the player must be in STOP mode before any SETUP operation can occur. 0 Exit Figure 10 Change Password 1. Press pushbutton Number 2 to access the Ratings menu Refer to Figure 3. Press 4 to Temporarily Unlock the Player, which is effective only for the current disc in the player. Press pushbutton Number 3 to access the On Screen Menu Language screen. If all setup adjustments are complete, press pushbutton Number 0 to exit the Initial Setup Menu. Select the language for these Menus. 1 English 2 French 3 Spanish 0 Exit Figure 11 16 SETUP How to Set On-Screen Messages and FL Display How to Set On-Screen Messages This allows you to turn On Screen Messages, that appear in the upper right corner of the screen, such as PLAY or STOP On or Off. Note: If a disc is loaded, the player must be in STOP mode before any SETUP operation can occur. How to Set FL Display The MVP831 front panel display, just below the disc tray, can be adjusted to be Bright or Dim. Note: If a disc is loaded, the player must be in STOP mode before any SETUP operation can occur. [. . . ] Press A-B REPEAT a second time when you reach the time on the disc where the repeatable segment is to end. Cancel the A-B REPEAT mode by pressing the A-B REPEAT pushbutton a third time. To View or Change DVD Disc Language Many DVDs are encoded with more than one audio Sound Track Language. The fourth Icon from the left indicates the current disc sound track language in use. [. . . ]