User manual MELITTA CAFFEO SOLO DELUXE

[. . . ] Danger due to electrical current If the appliance or the power cable is damaged, the risk of a fatal electric shock is run. Observe the following safety instructions to avoid dangers due to electrical current: – Do not use a damaged power cable. € A damaged power cable may only be replaced by the manufacturer, its customer service or a similarly qualified person. € Only use the appliance when it is in a technically flawless condition. [. . . ] Water hardness and filter It is important to properly set the water hardness so that the appliance displays the need to be descaled in due time. After inserting a Melitta® Claris® water filter, it is automatically set at hardness level 1. Setting the dispensed quantity and strength • Turn the coffee quantity regulator 3 to infinitely adjust the dispensed quantity. Regulator all the way to the left = 30 ml per cup Regulator all the way to the right = 220 ml per cup • Press the button until the desired strength is adjusted. The strength is displayed by the beans on display 9 (from = mild to = strong). Melitta® Claris® water filter The Melitta® Claris® water filter removes lime and other harmful substances from the water. The water filter should be changed every 2 months, however, at the latest when appears on the display. 2015 21:30:46 Inserting the water filter flashes during the entire changing process. € Put the water filter in a glass with tap water for several minutes before inserting it in the appliance. € Screw the water filter onto the thread at the bottom of the water reservoir. When rinsing is finished, the appliance is ready for operation and the water hardness is set to hardness level 1. Cleaning phase 4 ( bean is flashing): , the middle • The cleaning programme will be continued again and takes about 5 minutes. When illuminates, proceed as follows: • Empty the drip tray and coffee grounds container and insert them in the appliance as usual. Button to continue with the • Press the descaling programme (takes about 5 minutes). When illuminates, proceed as follows: • Empty the drip tray and reinsert it. € Insert the water filter if necessary („Water hardness and filter“, page 18). Ϭashing Off button to confirm the Auto-OFF function The appliance switches off automatically after the last action (depending on the setting). And • Press the simultaneously until • Press the illuminates. Other settings Energy-saving mode After the last action, the appliance switches automatically (depending on the settings) to the energy-saving mode. And • Press the simultaneously until • Press the illuminates. Display Time 30 minutes (factory setting) 2 hours 4 hours flashing 8 hours button twice. 2015 21:30:46 Brewing temperature From the factory, the brewing temperature is set to Level 2 (medium ). [. . . ] Direktivet forskriver rammerne for en tilbagetagelse og genanvendelse af brugt udstyr, der gælder inden for hele EU. Sluk for maskinen, og tænd for den igen på tænd/sluk-knappen Bryggekammeret er overfyldt. Reglaget längst ut till vänster = 30 ml per kopp Reglaget längst ut till höger = 220 ml per kopp • Tryck på knappen tills den önskade styrkan ställts in. Risk för hudutslag från avkalkningsmedlet Följ säkerhetsanvisningarna och mängdangivelserna på förpackningen till avkalkningsmedlet. [. . . ]