User manual MELITTA LOOK IV THERM DELUXE

[. . . ] Cleaning and maintenance must not be carried out by children, unless they are 8 years or older and are supervised. Keep the appliance and the power cable Away from children under 8 years of age. The appliance may be used by persons with reduced physical, sensory or mental abilities or lack of experience and/or knowledge if they are supervised or have been instructed in the safe use of the appliance and have understood the potential hazards. Children must not play with the appliance · Replacement of the power cable and all other repairs may only be carried out by Melitta® Customer Service or by an authorised repair shop. [. . . ] Each time you briefly press the CALC button the display changes to flashing one, two or three times, each time followed by a pause (. Once you have set the desired hardness level, again hold the CALC button down for longer than two seconds. The last water hardness level chosen remains even after removing the power cable. Fill the water tank with the desired amount of water using the therm jug. With the help of the water level GB display on the tank you can choose the correct 85ml coffee per cup, large cup symbol = approx. Close the lid on the water tank and place the therm jug with closed lid in the appliance. Fold a Melitta® filter bag 1x4® at the embossed seam and place it in the filter holder . Press the filter bag into the filter holder by hand, to ensure a good fit. With the Melitta® AromaSelector® you can set the taste of your coffee with just one hand: From mild-aromatic ( ) to strong-intensive ( ). The appliance switches off automatically at the latest 15 minutes after being switched on. The drip stop prevents your coffee from dripping, when you remove the pot from the appliance . With the help of the detachable inner filter you can dispose of the filter bag simply and easily. The brewed coffee flows through the central valve in the insulated lid of the jug. Remove the lid simply by pressing the seals on the Side while lifting the lid up . The jug lid, the filter insert and the swing filter can The CALC button lights up again if the appliance has been turned off without descaling. The CALC button will go off again only after the descaling programme has been completely finished. Based on the water hardness level you have set (see point 3) the descaling programme should be run promptly after the CALC button lights up. Follow the manufacturers instructions regarding amounts and pour the descaler into the water tank. We recommend using Melitta® "Anti Calc Liquid for Filter Coffee & Aqua Machines". To remove even stubborn limescale the descaling process takes 25 minutes. [. . . ] Guarantee performances lead neither to an extension of the guarantee period nor to a new beginning of the guarantee period for the device or installed spare parts. Within the guarantee period we will correct all device defects that are based on material or manufacturing errors, through repair or replacement of the device at our discretion. Defects that occurred due to improper connection, improper handling, or repair attempts by nonauthorized persons are not covered by the guarantee. The same applies for failure to comply with the use, care, and maintenance instructions as well for the use of consumables (e. [. . . ]