User manual MINOX DC-6311

[. . . ] 2-E Digital Camera >> FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] The image is captured about 2 seconds after the shutter button is pressed. The first image is captured about 10 seconds after the shutter button is pressed. Then the camera prepares for a second image by charging the flash, if required. The 10+2 mode is convenient when capturing group images in succession. This mode allows a specified number of images to be captured over a fixed time-interval. The interval can be set to 1, 3, 10, or 60 minutes, and the number of images can be set from 2 to 99. Between shots, the viewfinder LED flashes red and the LCD monitor is automatically turned off. (standby mode) [ Intv ] Interval The self-timer setting is automatically cancelled after an image is captured. Use of the [ 2S ] self-timer setting is effective in preventing motionblur that can result when the shutter button is pressed at long exposure times. The number of images that can be captured will differ depending on the capacity of the SD card, the image settings, and other factors. Interval photography is not available for when shooting TIFF images. User's Manual >> Exposure Compensation/Backlight Correction Your camera automatically adjusts the exposure for each scene. However, there may be situations where you wish to manually override the automatic determination of the camera and under- or over- expose the image. The EV compensation can be adjusted from [-2. 0 EV] to [+2. 0 EV] in 0. 3 EV steps. EV compensation is used when a suitable brightness (exposure) cannot be obtained in circumstances of high contrast (the difference in brightness between the subject and the background) is large, or when the subject that you want to photograph is very small within the screen. Set the mode dial to one of [ P ], [ Tv ] or [ Av ] and press the Each press of the button. button displays Exposure the setting in the order of [Blank], Backlight Correction, and Compensation. 2. -2. 0, -1. 7, -1. 3, -1. 0, -0. 7, -0. 3, 0, +0. 3, +0. 7, +1. 0, +1. 3, +1. 7, +2. 0 The larger the value, the brighter the image. E-41 42-E Digital Camera >> Effective Subjects and Set Values * * * * + (positive) compensation Printed matter comprising black text on whitish paper Backlighting Bright scenes or strong reflected light such as ski slopes When the sky accounts for a large area on the screen - (negative) compensation People illuminated by a spotlight, in particular, against dark background Printed matter comprising white text on blackish paper Weak reflecting bodies such as evergreen trees or darkish leaves Backlight correction (+1. 3, fixed) When the background is bright and the subject is dark. When subjects (people) have a light source such as the sun to their backs. * * * * * The backlight correction setting can be set in the [ [ ] and [ ] modes. ], [ P ], [ Tv ], [ Av], [ P ] Program (Automatic Exposure) Photography Mode The Vivicam 4000 automatically sets the shutter speed and the aperture to suit the brightness of the subject. This allows you to capture image with ease just like when the [ ] mode is selected. 1. Compose the image, press the shutter button down halfway, then press it down fully. Exposure compensation can be set. User's Manual >> [ Tv ] Shutter Speed Priority Photography Mode In this mode, images are captured with the priority given to shutter speed. If you set a fast shutter speed, you can capture images of moving subjects that look as if they are still. [. . . ] IMAGE FOLIO Image Folio is a comprehensive multimedia image-processing program. It enables you to process images, graphics, and drawings captured from scanners, VCRs, a laser discs, digital cameras, video capture boxes and any other location that the computer can capture images from. You can create new images by using the Image Folio's powerful tools. This sophisticated set of image-editing tools enables you to quickly create new images or enhance pre-existing ones. [. . . ]