User manual MOTOROLA DCR800

[. . . ] If battery power is low, your remote enters a "Low Battery Condition" to conserve battery power for retaining your settings. See "Installing Batteries"for more information on changing the batteries. Reset all settings: · Press and hold a device mode key (TV, AUDIO, DVD/ VCR, or Cable) or at least six seconds. The LED for each device key lights up, then the key for the device you selected remains on. [. . . ] Press 2, 3, and 4 to obtain all four-code digits. Note: Favorite channels must be preselected through the Electronic Programming Guide before this key works. Input Aspect PIP ON/OFF · Press this Key To. . . Turn the selected device ON or OFF Display the help screen (only available in CABLE mode) Return to last selected channel VOL +/CH +/Increase or decrease volume Select the next or previous channel Move up or down through menu screens or the Electronic Program Guide Exit any On-Screen Display (OSD) and return to regular viewing Display channel and program information Access the cable guide Select the video source Change the viewing aspect (if available) Turn Picture-inPicture (PIP) on or off (if available) Swap the PIP signal to the main display (if available) Move the position of the PIP display Select the next or previous channel in the PIP display (the main display does not change) 2. · 3. Audio, DVD/VCR, Select a device TV, Cable Direct access to Video On Demand (VOD), where available PIP SWAP SEARCHING FOR CODES If none of the codes listed under "Device Codes"on the back of this guide match your device, you can search for a set of commands that will work. Your remote will sample all the codes in its system for that device mode to find one that will allow you to control your device. Press and hold a device mode key (AUDIO, DVD/VCR, or TV) for at least six seconds. The LED for each device key lights up, then the key for the device you selected remains on. The following function keys are valid for Searching (Power is recommended): · Power · Mute · Play · CH + · Stop The device key's LED blinks three times, then turns off. The remote will send the IR command for the function you pressed in Step 2. If the device did not perform the function you pressed, repeat step 3. Press " to retry the previous code. PIP Move PIP CH +/- CHANGING VOLUME LOCK Locking the volume controls to a single device makes it easier to control volume, without having to guess whether the volume will change. If you lock the remote's volume controls to the TV (for example), you will always be able to change the volume to the level you want, without having to adjust it on multiple devices. Press and hold the device mode key (TV, AUDIO, DVD/VCR, or Cable) corresponding to the device you want to control volume for at least six seconds. The LED for each device key lights up, then the key for the device you selected remains on. The device key's LED blinks three times, indicating it has locked the volume control to the device you selected. The AUDIO device key always controls its own volume, regardless of the device is locked to volume control. User Guide OVERVIEW Your new Motorola DRC800 universal 4-in-1 remote operates your Motorola or or other manufacturer's cable settop box and up to three other devices. In addition, the DRC800 provides advanced features such as Digital Video Recording (DVR) control and Picture-in-Picture (PIP) support. You can lock volume control to any of these devices, to make adjusting your home entertainment volume easier. The DRC800 comes from the factory without the volume locked to any specific device. See "Reassigning Device Keys". REW Direct access to Pay Per View (PPV) programming (where available) Rewind VCR, DVD, VOD , DVR, or HTIB Play VCR, DVD, VOD , DVR, or HTIB Fast Forward VCR, DVD, VOD , DVR, or HTIB Record to VCR or DVR ADDITIONAL INFORMATION The Motorola DRC800 does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your Motorola remote control. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form, or by any means, electronic, mechanical, optical, manual, or otherwise, without the prior written permission of Motorola. [. . . ] 3. Cable Audio INSTALLING BATTERIES Your remote requires 2 AAA batteries. The first set of batteries is included, and should last up to 6 months under normal usage. Remove the battery case cover and the old batteries (if necessary). To specify a device 1. Look up the device you want to control in the device code list on the back of this guide. [. . . ]