User manual MOTOROLA DCT700 ALL-DIGITAL SET-TOP

[. . . ] Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the equipment. Any mounting of the appliance should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the equipment and to protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or similar surface. [. . . ] If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: · · · Increase the separation between the equipment and the affected receiver Connect the equipment on a circuit different from the one the receiver is on Ensure that the cover plate for the security card is secured and tight Declaration of Conformity According to 47 CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers, Motorola, Inc. , 6450 Sequence Drive, San Diego, CA 92121, 1-800-225-9446, declares under sole responsibility that the product identifies with 47 CFR Part 2 and 15 of the FCC Rules as a Class B digital device. Each product marketed is identical to the representative unit tested and founded to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47 CFR 2. 909. Operation is subject to the following condition: This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47 CFR, Paragraphs 15. 107 to 15. 109. Canadian Compliance This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respects toutes les exigences du Règlement sur le matériel brouilleur du Canada. Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. DCT700 DCT700 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE US Patent - 4476584, 4546387, 4575755, 4621285, 4558464, 4603349, 4613901, 4634808, 4712238, 4792973, 4864615, 4933898, 5083293, 5144664, 5111504, 5406228, 5497112, 5485577, 5091782, 5068724, 5093720, 5376968, 5345408, 5565922, 5517250, 5566089, 4908859, 5396518, 5511096, 5511082, 4631603, 4819098, 4577216, 5363408 NOTICE THEFT OF SERVICE IS A CRIME. INSTALLING THIS DEVICE WITHOUT PERMISSION OR UNAUTHORIZED TAMPERING, MODIFYING OR ALTERING IT IN ANY WAY MAY SUBJECT YOU TO CIVIL OR CRIMINAL PENALTIES. CHECK WITH YOUR LOCAL CABLE COMPANY. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Copyright © 2003 Motorola, Inc. This device incorporates a copyright protection technology that is protected by U. S. Use of the copyright protection technology is granted by Macrovision for home and other limited pay-per-view uses only, unless otherwise authorized by Macrovision. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. The DCT700 can provide an Electronic Program Guide (EPG) menu that allows you to conveniently select and view programs. You can also purchase Pay-Per-View special events, recent movies, or Video on Demand. Video on Demand is similar to renting a video, including the ability to pause, rewind, and fast-forward. This guide introduces you to the features and operation of the DCT700. Access to the DCT700 features is gained through the electronic program guide. To get the most out of your DCT700, be sure to read your electronic program guide instruction manual and remote control User Guide. The DCT700 requires a remote control to operate (remote control sold separately). 2 INTRODUCTION Front Panel NOTE We recommend that you use the Motorola universal remote control DRC450 (sold separately) to operate your DCT700. The DCT700 is controlled by your remote control (sold separately). The front panel has two LED displays: one to indicate the unit is turned on and one to indicate a message is present. ON MESSAGES 3 INTRODUCTION Rear Panel Before you begin installing the DCT700, take a moment to become familiar with the rear panel connections. The rear panel includes connectors for system cabling and a power cord to connect the DCT700 to an electrical power outlet. For cabling diagrams, see "Connecting Your DCT700". 1 2 TO TV/VCR L + R RF IN AUDIO VIDEO + +12V DC 3 4 5 4 INTRODUCTION Item 1 2 3 4 5 AUDIO OUT VIDEO RF IN TO TV/VCR Power Description Left/right audio outputs to connect the DCT700 to a TV, VCR, or A/V receiver. [. . . ] Connect the DCT700 using RCA baseband connectors to receive stereo (illustrated later in this section). + R AUDIO VIDEO + +12V DC RF IN CABLE IN AUDIO IN L R VIDEO IN S-VIDEO IN CABLE OUT AUDIO OUT L R VIDEO OUT S-VIDEO OUT TV AUDIO IN i CABLE IN AUDIO OUT o VIDEO IN VIDEO OUT S-VIDEO IN S-VIDEO OUT 15 CONNECTING YOUR DCT700 DCT700 TO TV/VCR L In these illustrations the baseband connectors on entertainment components are labeled R for right audio, L for left audio, and V or + + +12V DC VIDEO. R RF IN AUDIO VIDEO Composite Baseband TV Connecting the DCT700 using the RCA-type baseband outputs ® enables you to experience stereo and Dolby Surround sound when available. AUDIO IN i CABLE IN AUDIO OUT o VIDEO IN S-VIDEO IN VIDEO OUT S-VIDEO OUT 16 CONNECTING YOUR DCT700 DCT700 TO TV/VCR Composite VCR Cabling + R RF IN AUDIO VIDEO + +12V DC This diagram illustrates how to connect the DCT700 to a VCR using the audio connectors on the VCR. CABLE IN AUDIO IN L R VIDEO IN S-VIDEO IN CABLE OUT AUDIO OUT L R VIDEO OUT S-VIDEO OUT TV AUDIO IN i CABLE IN AUDIO OUT o VIDEO IN VIDEO OUT S-VIDEO IN S-VIDEO OUT 17 CONNECTING YOUR DCT700 DCT700 TO TV/VC R L Stereo Cabling Diagram (VCR to Stereo) + AU DIO VIDEO + +12V DC R RF IN This diagram illustrates how to connect the DCT700 to a stereo using the audio connectors on the VCR. The VCR sound is played through the stereo. CABLE IN AUDIO IN L R VIDEO IN S-VIDEO IN CABLE OUT AUDIO OUT L R VIDEO OUT S-VIDEO OUT TV AUDIO IN o CABLE IN AUDIO OUT i VIDEO IN VIDEO OUT S-VIDEO IN S-VIDEO OUT STEREO AUDIO IN i AUDIO OUT o 18 CONNECTING YOUR DCT700 DCT700 TO TV/VCR Stereo Cabling Diagram (TV to Stereo) + R RF IN AU DIO VIDEO + +12V DC This configuration provides for the TV sound to play through the stereo. CABLE IN AUDIO IN L R VIDEO IN S-VIDEO IN CABLE OUT AUDIO OUT L R VIDEO OUT S-VIDEO OUT TV AUDIO IN i CABLE IN AUDIO OUT o VIDEO IN VIDEO OUT S-VIDEO IN S-VIDEO OUT STEREO AUDIO IN i AUDIO OUT o 19 TROUBLESHOOTING Before calling your service provider, review the troubleshooting guide. Problem No sound Possible Solution Press MUTE on the remote control to restore the volume level. Make sure the TV or stereo volume is set to an appropriate level. No picture Check to be sure that all cables are connected properly (hand-tighten if necessary). [. . . ]