User manual MOTOROLA DTA100 QUICK START GUIDE

[. . . ] Plug the DTA100 power cord into the receptable on the back of the unit. If you wish to place your DTA100 out of view, you can affix velcro squares to the two mounting squares on the bottom of the DTA100. Once in place, you can use the velcro squares to attach the DTA100 to the back of the TV or within the entertainment system. [. . . ] · Do not install the terminal in an area where condensation occurs. 3. 4. 1 DTA100 Quick Start Guide Overview Congratulations on receiving a Motorola DTA100 Digital Transport Adapter. Connection Options The DTA100 transport adapter supports the RF out (coaxial) video/audio connection. This connection supports Standard-Definition video and audio. DTA100 Quick Start Guide 2 Connecting Your Device Connecting an SDTV 1. Connect a coaxial cable from the cable wall outlet to the Cable IN connector on the DTA100. Connect a coaxial cable to the To TV connector on the DTA100 and the Cable / Antenna IN on the TV. 2. 3 DTA100 Quick Start Guide Connecting Your Device Connecting an SDTV and VCR/DVD Recorder 1. Connect a coaxial cable from the cable wall outlet to the Cable IN connector on the DTA100. Connect a coaxial cable to the To TV connector on the DTA100 and the Cable / Antenna IN on the VCR/DVD Recorder. Connect a composite video cable from the Video Out connector on the VCR/ DVD Recorder to the Video In connector on the TV and a stereo audio cable from the Audio L / R Out connectors on the VCR/DVD Recorder to the Audio Left In and Audio Right In connector on the TV. or Connect a coaxial cable to the To TV connector on the VCR/DVD Recorder to the Cable / Antenna IN connector on the TV. 2. 3. DTA100 Quick Start Guide 4 Connecting Your Device Connecting an A/V Receiver, SDTV, and VCR / DVD Recorder 1. Connect a coaxial cable from the cable wall outlet to the Cable IN connector on the DTA100. Connect a coaxial cable from the To TV connector on the DTA100 to the Cable / Antenna IN connector on the VCR/DVD Recorder. Connect a composite video cable from the Video OUT connector on the VCR / DVD Recorder to the VCR Video IN connector on the A/V Receiver and a stereo audio cable from the Audio L / R OUT connector on the VCR / DVD Recorder to the VCR Audio L / R IN connector on the A/V Receiver. Connect a composite video cable from the TV / Monitor VIDEO OUT connector on the A/V Receiver to the Video IN connector on the TV and a stereo audio cable from the TV / Monitor AUDIO L / R OUT connectors on the A/V Receiver to the Audio Left and Audio Right connectors on the TV. 2. 3. 4. 5 DTA100 Quick Start Guide Troubleshooting Before calling your service provider, review this troubleshooting guide. If your problem still exists, contact your service provider. Problem The DTA100 will not power on Possible Solution Verify whether the DTA100 is powered on by looking at the POWER icon on the front of the DTA100. · If the DTA100 is connected to a switched outlet, verify the switch is turned on. · Verify that the AC power cord of the external power supply is connected to the DTA100 and an AC outlet. · Unplug the DTA100 from the AC outlet, and then plug it back in. Verify that the remote control is in Cable mode, and turn the DTA100 on by pressing the POWER key. [. . . ] Note: Closed captioning may not be available on the current program. The remote control does not work There is no video on the TV screen There is no audio when viewing cable channels No closed captions display DTA100 Quick Start Guide 6 Motorola, Inc. www. motorola. com MOTOROLA and the Stylized M Logo are registered in the U. S. All other product or service names are the property of their registered owners. [. . . ]