User manual MOTOROLA DVR530HD

[. . . ] Welcome! Thank you for purchasing the Motorola Digital Video Recorder (DVR). For optimum performance and safety, read this guide and retain it for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR FRONT), REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON. This installation should be made by a qualified service person and should conform to all local codes. REPAIRS: If you find the unit in need of repair, contact your system provider for repair or replacement. Graphical symbols and supplemental warning marking locations on bottom of terminal. NOTE TO SYSTEM INSTALLER WARNING: "DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. " To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. [. . . ] Press the play button on the remote control to resume playback at any time within 90 minutes of pausing. 29 After resuming playback you will be viewing a delayed recording of the program you paused, and the timer will display the time difference between the recording and the live broadcast. While in this delayed mode, you may pause again, fast forward, fast reverse, skip-forward or skip-backward until you return to live programming. You can return to the live broadcast either by advancing the recording until it "catches up" to the live program, or by pressing the stop button on the remote control. You may view the IPG, Options Menu and DVR List while a live program is paused, but tuning to a different channel, playing a previously recorded program or putting the DVR530 into standby mode will erase the delayed recording and you will be unable to resume your paused program. `Instant Replay' While viewing any program, use the fast reverse or skip-backward buttons on the remote control to reverse to any point you have viewed within the past 90 minutes or since you tuned to the current channel. It is not possible to reverse to programming you viewed on a previous channel. To return to live programming after reversing, press the stop button on the remote control or advance the playback (using the Skip-Forward or Fast Forward controls) until the playback "catches up" to the live programming. TIP: You may use the Pause and Replay features together: If you reverse a live program after pausing it, you will be able to reverse to the moment when you last tuned to that channel, not only to the moment when the program was paused. 30 On-Screen Controls On-Screen Displays During Viewing While viewing recorded programs or using live TV features like pause, the DVR530 helps you control the playback with on-screen icons and indicators. On-screen displays usually disappear to give you an unobstructed view of your programs, but when the remote control is used to control playback, a banner will appear along the bottom on the screen containing details of the program being viewed as well as indicators for the controls being used. Press ENTER on the remote at any time to view this banner without affecting playback. At the right of the banner, you will see the channel number and original broadcast time of the recorded program underneath the current date and time. Midway across the banner the title of the recorded program is displayed below a yellow progress indicator. This blue bar will fill from left to right with yellow until the end of the recording is reached. At the left of the banner, you will see a timer that counts either the progress of the recording or the time difference between live programming and your paused or reversed program. Beside this timer you will see a circular space inside of which the control icons appear. 31 Navigation Compass. Indicates that the browsing buttons on the remote can be or are being used. Typically seen during live programming when no recording or playback features are being used. There are three speeds for advancing playback, marked by increasing numbers of arrows pointing to the right. One, two or three presses of the fast forward button on the remote will determine speed of advance. There are three speeds for reversing playback, marked by increasing numbers of arrows pointing to the left. One, two or three presses of the fast reverse button on the remote will determine speed of reverse. Using the fast forward control while paused allows 2 speeds of very slow advance. Slow Reverse. [. . . ] 3054-3056 Polk Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3057 QED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3058 RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3060 Sears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]