User manual MOTOROLA H385

[. . . ] BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H385 Headset. motorola H385 Earhook Speaker Power Button Microphone Volume Buttons Quick Start Guide Call Button Indicator Light 1 CHARGE Your Headset's Battery Charging Port 2 START BLUETOOTH FEATURE Your Phone Your phone's Bluetooth® feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones (at the main menu): 1 Press M (Menu) > Settings > Connection > 1 Plug the Motorola charger into the end of the headset. [. . . ] 2007. 3 PAIR CONTINUED Your Phone 4 TEST AND USE Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: Your phone and headset are now paired and connected to make and receive calls. To make a call: 1 On your Motorola phone, press M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. 1 Place headset ear bud on your ear with the earhook also securely fitted over your ear. 2 On the phone, dial the number you want to call and press SEND key on your phone. 2 Select Motorola H385. Enter the passkey: 0000 Select OK. 3 If your phone and headset are successfully After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time by pressing and holding the Power button. paired, you will hear ringing on the headset. When your headset successfully pairs with your phone, the indicator light flashes purple and blue. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. USING YOUR H385 See Features and Functions Guide on the reverse side for information on using your H385 TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, first turn off the other device, then turn your headset off and on. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/Bluetoothsupport Features and Functions Guide TURNING HEADSET ON AND OFF To turn your headset on, press and hold the Power button until the indicator light flashes. To turn your headset off, press and hold the Power button until the indicator light flashes rapidly and then turns off. Power Button IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H385. Indicator Light WEARING THE HEADSET Your H385 headset is supplied with both roundand oval-shaped earbuds to provide personal choice for maximum comfort. The earbud is fitted onto the end of your headset's earpiece speaker, and placed onto your ear when using your headset as shown. CHANGING FOR USE ON OTHER EAR You can wear your H385 headset on your left or right ear. [. . . ] Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. OPERATING STATUS With No Charger Plugged In Indicator Light Off Three blue flashes Steady blue Rapid blue/purple flashes Quick blue flash Slow blue flash Slow red flash Slow purple flash Quick red flash Headset Status Power off Powering on/off Pairing mode Pairing/connect successful Incoming/outgoing call Connected (on a call)/ Standby (not on a call) Idle (not connected to phone) Connected call muted Low battery AUDIO TONES Audio Tone Ascending tone Descending tone Two ascending tones Ring tone Two short tones when pressing Volume button High/low tones repeated every 60 sec. No audio indications; deteriorating quality Three ascending tones Three descending tones Two rapid ascending tones Two rapid descending tones Headset Status Powering on Powering off Pairing successful Incoming call Volume at minimum or maximum Low battery Out of range Connected call Ended call Mute enabled Mute disabled Note: After 30 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. [. . . ]