User manual MOTOROLA H690

[. . . ] When the headset's battery is fully charged (about 2. 5 hours), the indicator light turns green. Note: Headset is not functional while charging. Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life of the rechargeable battery is approximately 400 charges. Your phone's Bluetooth feature is off by default. [. . . ] The indicator light first flashes during power up, then initiates easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. 1 On your Motorola phone, press M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. 2 Select Motorola H690. When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue and purple. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. Indicator Light (steadily blue for pairing mode) If the headset does not enter pairing mode, see TROUBLESHOOTING for help. 4 TEST AND USE USING YOUR H690 See Features and Functions Guide on the reverse side for information on using your H690 Your phone and headset are now paired and ready to make and receive calls. See "Wearing the Headset" on the reverse side of this guide. 2 On the phone, dial the number you want to call and press SEND key on your phone. If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, make sure your headset is turned ON and your phone's Bluetooth feature is ON. TROUBLESHOOTING My headset will not charge. See step 1 and "Ear Cushions and Your Headset" to see proper orientation. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). Make sure your phone is on, and the Bluetooth feature is turned on in your phone (see step 2). If Bluetooth was turned off or was turned on only temporarily, you may need to restart it (see step 2) and pair your phone and headset again (see step 3). Features and Functions Guide TURNING H690 ON AND OFF To turn ON your H690, slide the Power switch towards the power symbol, as shown below. The indicator light first flashes blue for several seconds, then: flashes blue (if paired and connected with another device) becomes steadily blue (if ready to be paired) To turn OFF your H690, slide the Power switch away from the power symbol. [. . . ] You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www. motorola. com/rtte. To find your DoC, enter the product Approval Number from your product's label in the "Search" bar on the web site. MAKING CALLS Function Receive a call Mute or unmute a call Reject a call Action Tap the Call button Tap both Volume buttons Press and hold a Volume button until you hear two descending tones Tap the Call button Press and hold the Call button until you hear two ascending tones Tap the Call button and speak the name after the tone MAKING CALLS CONTINUED Function Answer a second incoming call End an active call and resume a call on hold Reject a second incoming call Action Press and hold Call button Tap the Call button Press and hold either Volume button until you hear an audio tone End a call Redial last call Note: Some features are phone/network dependent. Make a voice dial call Note: Your H690 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. [. . . ]