User manual MOTOROLA H710

[. . . ] When the headset's battery is fully charged (about 2 hours), the indicator light turns green. Bluetooth Link > Setup. 2 Scroll to Power. The Bluetooth feature remains on until you turn it off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. 2 Disconnect the charger. Note: Headset is not functional while charging. Note: This product uses a lithium ion, rechargeable, non-replaceable battery. [. . . ] Re-open the boom to make a call. USING A SE Multipoint technology allows you to make and receive calls from two Bluetooth enabled devices like your personal and business phones. To pair a second phone to your headset, follow these steps: ECOND PHONE? 2 Use your first phone to connect to your headset. a On your Motorola phone, press M (Menu) 1 Turn off any phones or devices that are 2 3 already paired with your headset. Perform Step 2 ("Start Bluetooth Feature"), and Step 3 ("Pair"), and Step 4 ("Test and Use") to pair your headset with your second phone. > Settings > Connection > Bluetooth Link > Audio Devices. The phone lists Bluetooth devices it finds. b Select Motorola H710. The last paired phone (your second phone) is now your primary phone for voice dial functionality. After you have successfully paired both phones with your headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To reconnect your headset with your first phone (and thus be connected to both phones), follow these steps: 1 Turn on first phone. TIPS FOR USING H710 WITH TWO PHONES Use the following tips when using H710's multipoint technology: TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then close and reopen the headset boom. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Press and hold both Volume buttons and the Call button for more than 10 seconds. The indicator light flashes blue 3 times and then become steadily lit. The headset is now in pairing mode (see step 3B) to complete the pairing process. If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/Bluetoothsupport Incoming calls can be answered from both phones: ­ When answering a call, the idle phone is disconnected from the headset. ­ When the call ends, the idle phone is automatically reconnected to the headset. Last number redial dials the last outgoing call made from either phone. Voice dial is accessible from either phone via different key actions: ­ For your primary device (last paired phone), tap the Call button until you hear the tone. [. . . ] You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www. motorola. com/rtte. To find your DoC, enter the product Approval Number from your product's label in the "Search" bar on the web site. Reject a call Note: Some features are phone/network dependent. MAKING CALLS CONTINUED Function Redial last call Action Press and hold the Call button until you hear a tone Press and hold the Call button (places first call on hold), and hear a tone Press and hold either Volume button until you hear a tone Press both Volume buttons and Call button, and hear a descending tone Tap both Volume buttons until you hear a mute tone AUDIO TONES Audio Tone Ring tone Short tone High to low tone Two short tones when pressing Volume button during a call Ascending tone Low tone (repeated every 15 seconds) Descending tone Low to high tone Headset Status Incoming call Phone network not available End call Volume at minimum or maximum Mute enabled Mute reminder Answer a second incoming call Reject second incoming call Transfer a call from the headset to the phone Mute or unmute a call Note: Your H710 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. No audio indications; deteriorating quality Two tones repeated every minute Mute disabled Connection confirmation/voice activation Out of range Low battery INDICATOR LIGHT With No Charger Plugged In Headset Indicator Off Three blue flashes Steady blue Quick blue flash Slow blue pulse Slow blue flash Headset Status Power off Powering on/off Pairing mode Incoming/outgoing call on primary phone Connected (on a call) Standby (not on a call) INDICATOR LIGHT CONTINUED With No Charger Plugged In Headset Indicator Red flash Slow purple pulse Quick red flash Headset Status Idle (not connected to phone) Connected call muted Low battery Quick blue/purple flashes Pairing successful Tip: Set your primary and secondary phones to different ring tones to know which phone is ringing when wearing the headset. [. . . ]