User manual MOTOROLA H780

[. . . ] For most Motorola phones (from home screen): 1 Press M (Menu) > Settings > Connection > 1 Plug the Motorola charger into the end of the headset. When the headset's battery is fully charged (about 2 hours), the indicator light turns green. Bluetooth Link > Setup. 2 Scroll to Power. The Bluetooth feature remains on until you turn it off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. 2 Disconnect the charger. Note: Headset is not functional while charging. [. . . ] If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). The headset is now in pairing mode (see step 3B) to complete the pairing process. If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/Bluetoothsupport Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www. motorola. com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809521A25-A Bluetooth QD ID: B014226 MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. All other product or service names are the property of their respective owners. All rights reserved. 4 TEST AND USE USING A S Multipoint technology allows you to make and receive calls from two Bluetooth enabled devices like your personal and business phones. To pair a second phone to your headset, follow these steps: Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headset over your ear. 2 On the phone, dial the number you want to call and press SEND key on your phone. 1 Turn off any phones or devices that are 2 3 already paired with your headset. Perform Step 2 ("Start Bluetooth Feature"), and Step 3 ("Pair"), and Step 4 ("Test and Use") to pair your headset with your second phone. 3 If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To reconnect your headset with your first phone (and thus be connected to both phones), follow these steps: 1 Turn on first phone. ECOND PHONE? 2 Use your first phone to connect to your headset. a On your Motorola phone, press M (Menu) TIPS FOR USING H780 WITH TWO PHONES Use the following tips when using H780's multipoint technology: > Settings > Connection > Bluetooth Link > Audio Devices. The phone lists Bluetooth devices it finds. b Select Motorola H780. The last paired phone (your second phone) is now your primary phone for voice dial functionality. After you have successfully paired both phones with your headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. Incoming calls can be answered from both phones: ­ When answering a call, the idle phone is disconnected from the headset. ­ When the call ends, the idle phone is automatically reconnected to the headset. Last number redial dials the last outgoing call made from the primary phone. Voice dial is accessible from your primary device (last paired phone) by tapping the Call button and speaking the name after the tone. [. . . ] You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www. motorola. com/rtte. To find your DoC, enter the product Approval Number from your product's label in the "Search" bar on the web site. MAKING CALLS Function Make a voice dial call (Primary phone) End a call Action Tap the Call button and speak the name after the tone Tap the Call button, and hear a high-to-low tone Tap the Call button, hear the ring tone, then a low-to-high tone Press and hold either Volume button until you hear a tone MAKING CALLS CONTINUED Function Redial last call Action Press and hold the Call button until you hear a tone Press and hold the Call button (places first call on hold), and hear a tone Press and hold either Volume button until you hear a tone Slide the power button to the OFF position Tap both Volume buttons until you hear a mute tone Answer a second incoming call Answer a call Reject second incoming call Transfer a call from the headset to the phone Mute or unmute a call Reject a call Note: Some features are phone/network dependent. Note: Your H780 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. AUDIO TONES Audio Tone Ring tone Short tone High to low tone Two short tones when pressing Volume button during a call Ascending tone Low tone (repeated every 15 seconds) Descending tone Low to high tone Headset Status Incoming call Phone network not available End call Volume at minimum or maximum Mute enabled Mute reminder INDICATOR LIGHT With No Charger Plugged In Headset Indicator Off Three blue flashes Steady blue Quick blue/purple flashes Quick blue flash Quick purple flash Slow blue pulse Slow blue flash Headset Status Power off Powering on/off Pairing mode Pairing successful Incoming/outgoing call on primary phone Incoming/outgoing call on secondary phone Connected (on a call) Standby (phone connected--not on a call) Standby (two phones connected--not on a call) No audio indications; deteriorating quality Two tones repeated every minute Mute disabled Connection confirmation/voice activation Out of range Low battery Slow green flash Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. [. . . ]