User manual MOTOROLA HIGH-DEFINITION OFF-AIR TUNER HDT100

[. . . ] User Guide HDT100 High Definition Tuner POWER SIGNALLOSS MENU ENTER POWER EXIT IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 8 Read instructions All the safety and operating instructions should be read before the appliance is operated. Retain instructions The safety and operating instructions should be retained for future reference. Heed warnings All warnings on the appliance and in the operating instructions should be adhered to. Follow instructions All operating and use instructions should be followed. [. . . ] Once you complete your video connections, proceed to the instructions for the audio connections. 11 INSTALLING THE HDT100 HDT100 Manufactured under license from Dolby Laboratories. Y VIDEO L Pb 100~240V AC 50~60 Hz , 2A RS -232 OPTICAL Pr R S-VIDEO AN T. IN S-Video cable Either / or TV INPUT S-VIDEO VIDEO Video cable 12 Connecting for S-Video or Composite Video High definition video can only be viewed with component video connections. To connect for S-Video: Connect an S-Video cable (not supplied) to the S-VIDEO connector on your HDT100 and the INPUT S-VIDEO connector your TV. If your TV does not offer S-Video, use the composite (VIDEO) connections. To connect for composite video: Connect a video cable (not supplied) to the VIDEO connector on your HDT100 and the INPUT VIDEO connector on your TV. Now proceed to the next step--hooking up your audio connections. 13 INSTALLING THE HDT100 HDT100 Manufactured under license from Dolby Laboratories. Y VID EO Pb 100~240V AC 50~60 Hz , 2A RS -232 OPTICAL L R S-VID EO AN T. IN Pr Audio cable TV INPUT AUDIO LEFT AUDIO RIGHT 14 Audio Connections To hook up your audio connections: Connect the stereo audio cable supplied with your HDT100 to the L and R connectors on the HDT100 and the INPUT AUDIO LEFT and RIGHT connectors on your TV. Now proceed to the next step--connecting your antenna and power cord. 15 INSTALLING THE HDT100 HDT100 Manufactured under license from D olby Laboratories. Y VIDEO Pb 100~240V AC 50~60 Hz , 2A RS -232 OPTICAL L Pr S-VID EO - R ANT. IN To wall outlet To antenna 16 Connecting the Antenna and Power Cord You can use an outdoor or indoor antenna to receive over-the-air high definition TV signals: 1 2 Connect your antenna's coaxial cable to the ANT IN connector on your HDT100. Plug the power cord supplied with your HDT100 into the HDT100's power connector and then plug the cord into a wall outlet. Now that you've completed hooking up your HDT100, you're ready to program your HDT100 with over-the-air digital TV stations. Proceed to "Auto Scan" on the following page for instructions. 17 AUTO SCAN Before you can start using the HDT100, you need to program it with the station numbers of the over-the-air digital TV stations available in your area. This can be done by simply running auto scan from the HDT100's on-screen menu. You can navigate the on-screen menu from the HDT100's front panel or by using the remote control: · · · Use the !and "arrow keys to move up and down the on-screen menu Use the SELECT button to select the highlighted item on the on-screen menu Use the EXIT button to return to the main menu from a submenu or to leave the main menu To run auto scan: 1 2 Press the POWER button on the HDT100 front panel or remote control to turn on the receiver. The Menu screen is displayed: 3 Using the "arrow key, highlight Installation and press SELECT. The Password window is displayed. 18 4 Enter your four-digit password. If you have not yet created your own password, enter the default password: 0000. The Installation menu is displayed: If you wish to change your password, see "Changing Your Password" on page 28. 5 Highlight Auto Scan and press SELECT. An indicator is displayed showing the scan's progress: 19 As each digital TV signal is scanned, you'll see the signal's channel number and program name displayed on the Program List: The auto scan will end on channel 69. 6 7 Press EXIT to return to the main menu. [. . . ] Connect a stereo audio cable to the OUTPUT AUDIO OUT R and L connectors on the stereo VCR and the VCR AUDIO IN R and L connectors on the A/V receiver. Connect a video cable to the INPUT VIDEO connector on the stereo VCR and the VIDEO VCR OUT connector on the A/V receiver. Connect a video cable to the OUTPUT VIDEO connector on the stereo VCR and the VIDEO VCR IN connector on the A/V receiver. Connect a video cable to the INPUT VIDEO connector on the stereo TV and the TV/MONITOR OUTPUT VIDEO connector on the A/V receiver. When using the Digital Audio output (OPTICAL or SPDIF), the left / right baseband audio connections to the A/V receiver are not needed. 37 FINDING DIGITAL TV STATIONS IN YOUR AREA To find the digital TV stations available in your area: 1 2 3 Log on to the following website: http://www. antennaweb. org/ Select Choose An Antenna. [. . . ]