User manual MOTOROLA HMEZ1000

[. . . ] This device must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met. Battery Life For your Motorola Home Monitoring & Control System devices that require batteries, use high quality, non-corrosive batteries designed for use in electronic equipment. Do not use Rechargeable batteries in any Motorola Home Monitoring & Control System device. Registration Register your product by accessing this website: http://broadbandregistration. motorola. com Copyright © 2004 by Motorola, Inc. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Motorola, Inc. [. . . ] Do NOT connect your USB Gateway to your computer until instructed to do so. When the Installation wizard instructs you, connect your Motorola USB Gateway to your computer. Plug in your Motorola Wireless Camera into an AC wall outlet and use the Discovery tool to enable the Motorola Home Monitor software to discover the camera. (Optional) Discover and install any other Motorola Home Monitoring & Control components you have purchased. Review the Tips and Tricks section of the Motorola Home Monitoring & Control System User Guide for ways to improve the performance of your Motorola Home Monitoring & Control System. Page 2 Easy Start Kit Quick Start Guide Installing the Software and USB Gateway Hardware Do not connect your USB Gateway to your computer until the Installation Wizard instructs you to do so. 1 Insert the Motorola Home Monitoring & Control System CD in the CD-ROM drive. a b c If the application does not appear, right-click the Start button and select Explore. Double-click Launch. exe to start the application. 2 3 4 5 Click Next. Click Next to accept the default destination folder or click Browse to select a new one. After a few moments, the Install Motorola Home Monitor Hardware and Driver window is displayed. Remove the back cover from your USB Gateway. Power Video Status Data 6 7 Plug the AC adapter into the Power port on the USB Gateway and into an AC wall outlet. Connect the USB cable on the Gateway to the USB port on your computer. Windows automatically installs the required drivers. USB port on PC (step 7) AC adapter (step 6) 8 9 10 If desired, replace the USB Gateway back cover as described in the Motorola Home Monitoring & Control System User Guide. Be sure the checkbox "Launch Motorola Home Monitor" is selected. The Motorola Setup Wizard is displayed. Page 3 Quick Start Guide Easy Start Kit 11 12 13 Click Next. The Device Discovery window is displayed: Each device must be discovered to work with the system. 14 Plug in the wireless camera's 9V AC power adapter into an AC power outlet that cannot be switched on and off. When AC power is not available, you can use batteries to provide power for about two hours of video transmission. To associate the Wireless Camera with your USB Gateway, push the discovery button on the camera with the discovery tool. After the camera is discovered, it is listed on the Device Discovery window. The camera will remain "discovered. " For information about mounting the camera, see the Wireless Camera Quick Start Guide. If you have a Wi-Fi® wireless network, choose the Wi-Fi network channel from the drop-down list and click Next. The Motorola Home Monitor software intelligently works around this channel. If you do not have a Wi-Fi wireless network, choose Don't Know from the drop-down list and click Next. [. . . ] If your server requires authentication, select the checkbox and enter the necessary information. The Account Name and Password are for your Authentication Server, if using one. You are now able to set up profiles to send event notifications. 4 Profile Setup 1 2 3 4 5 6 Page 6 Click Event Setup from the main menu of the MHM program. To request support seven days a week, 24 hours a day, go to http://www. motorola. com/ homemonitoring/support/emailsupport. asp or call 1 (877) 466-8646. Page 7 Quick Start Guide Easy Start Kit FAQ The Gateway does not recognize the camera during discovery mode? [. . . ]