User manual MOTOROLA HS810

[. . . ] For most Motorola phones: 1 Select M (Menu) > Settings > Connection > Release Tab Down Bluetooth Link > Setup. 1 Plug the Motorola charger into the end of the headset with the release tab facing down. When the headset's battery is fully charged (about 2 hours), the indicator light turns off. 2 Scroll to Power. [. . . ] The Bluetooth feature remains on until you turn it off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. 2 Disconnect the charger. Note: Headset is not functional while charging. or visit us at www. hellomoto. com 3 PAIR Your Headset Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www. hellomoto. com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809495A04-O When you see this symbol on a Motorola product, do not dispose the product with household waste. Before you can use your headset, you must pair (link) it with your phone. Step A - PUT THE HEADSET IN PAIRING MODE Indicator Light 1 Ensure the headset is turned off (indicator light not blinking). 2 Press and hold the Call E button for 4 or 5 seconds. The indicator light will initially flash, but continue to hold down the button until the indicator light is steadily lit. If the indicator light is flashing or not steadily lit when releasing the button, repeat both steps 1 and 2 on this page. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. To turn off the headset, press and hold the Call E button on your headset for 5 seconds. Call Button IMPORTANT: Be sure to first follow the instructions on the reverse side to complete initial setup of your HS810 Indicator Light WEARING THE HEADSET 1 Open the earhook. 4 Point the microphone toward your mouth. CHANGING FOR USE ON OTHER EAR You can wear your HS810 headset on your left or right ear. To change ear orientation, simply flip the earhook all the way over. ADJUSTING VOLUME To adjust the volume on your headset, press the Volume Up or Volume Down button until you reach the desired volume level. Volume Buttons When increasing (or decreasing) speaker volume, a single audio tone is heard when reaching maximum (or minimum) level. MAKING CALLS Function Make a voice dial call Action Tap the Call E button and speak the name after the tone Tap the Call E button Press and hold the Call E button until you hear a beep Tap the Call E button Press and hold the Call E button until you hear a beep MAKING CALLS CONTINUED Function Answer a second incoming call Toggle between two active calls Action Press and hold the Call E button (places first call on hold) Press and hold the Call E button (places other call on hold) Press and hold the Call E button until you hear a beep Tap the Call E button End a call Redial a number Put an active call on hold or resume a call Transfer a call from the phone to the headset Receive a call Reject a call Note: Your HS810 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. Note: If the link between the headset and phone abnormally disconnects (for example, out of range), the headset tries to reestablish the link. INDICATOR LIGHTS The indicator light provides information about your headset status. With the Charger Plugged In Indicator Light Headset Status On (steady) Off Charging Charging complete With No Charger Plugged In Indicator Light Off On (steady) 10 rapid flashes Slow pulse Quick flash Headset Status Power off Pairing mode Pairing successful Connected (on a call) Standby (not on call) AUDIO TONES The audio tones provide information about your headset status. [. . . ] See your phone's user's guide for more information. Note: If the link between the headset and phone abnormally disconnects (for example, out of range), the headset tries to reestablish the link. INDICATOR LIGHTS The indicator light provides information about your headset status. With the Charger Plugged In Indicator Light Headset Status On (steady) Off Charging Charging complete With No Charger Plugged In Indicator Light Off On (steady) 10 rapid flashes Slow pulse Quick flash Headset Status Power off Pairing mode Pairing successful Connected (on a call) Standby (not on call) AUDIO TONES The audio tones provide information about your headset status. [. . . ]