User manual MOTOROLA HS815 Bluetooth Headset Quick Start Guide

[. . . ] BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. HS815 Bluetooth® Handsfree Headset Get Connected in 4 Quick Steps 1 - CHARGE 2 - START BLUETOOTH 3 - PAIR 4 - TEST AND USE For help, contact us at 1- 877-MOTOBLU or visit us at www. hellomoto. com Take a moment before you get started to familiarize yourself with your new HS815 Headset. Earhook Charging Earhook Charging Port Call Button Port Call Button Indicator Light LED Indicator Microphone Microphone Volume Buttons Volume Buttons Speaker Speaker (on reverse (on reverse side) side) 1 CHARGE Your Headset's Battery 2 START BLUETOOTH FEATURE Your Phone Your phone's Bluetooth feature is off by default. [. . . ] 2005. 3 PAIR CONTINUED Your Phone 4 TEST AND USE Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: Your phone and headset are now paired and ready to make and receive calls. To make a call: 1 On your Motorola phone, press M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. 1 Place the headset over your ear. 2 On your phone, dial the number you want to call and press the SEND key. 2 Select Motorola HS815. Enter the passkey: 0000 Select OK. 3 If your phone and headset are successfully After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time. paired, you will hear ringing on the headset. When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. USING YOUR HS815 See Features and Functions Guide on the reverse side for information on using your HS815. TROUBLESHOOTING My phone doesn't find my headset. Make sure the indicator light on your headset is on and steady when your phone is searching for devices (see step 3). Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). [. . . ] Audio Tone Single high tone when pressing Volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating audio quality Ring tone Single high tone Single low tone Dual high/low tone Low to high tone Headset Status Volume minimum or maximum reached Low battery Out of range Incoming call Pairing confirmation or End call Voice activation Voice tag not recognized Phone network not available Note: After 5 minutes of inactivity, the indicator light stops flashing to conserve power, but the headset remains in standby mode. [. . . ]