User manual MOTOROLA MOTOPURE H12

[. . . ] For most Motorola phones (from home screen): 1 Press M (Menu) > Settings > Connection > Bluetooth Link > Setup. When placing headset in the charger case or desktop charger, the indicator light turns red when the battery is charging. When the headset's battery is fully charged (about 2. 5 hours), the indicator light turns green. Note: Headset is not functional while charging. Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life of the rechargeable battery is approximately 400 charges. 2 Scroll to Power. [. . . ] Under normal use, the expected life of the rechargeable battery is approximately 400 charges. 2 Scroll to Power. The Bluetooth feature remains on until you turn the feature off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. TROUBLESHOOTING My headset will not charge. See step 1 and "Ear Cushions and Your Headset" to see proper orientation. Make sure thay any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Motorola, Inc. Storing headset fully charged in high temperature conditions may permanently reduce the life of the internal battery. Battery life may temporarily shorten in low-temperature conditions. The desktop charger displays your headset for easy access at home or the office. The clip can be attached to a shirt, bag, or purse strap. Features and Functions Guide TURNING H12 ON AND OFF To turn ON your H12, slide the Power switch towards the power symbol, as shown below. The indicator light first flashes blue for several seconds, then: flashes blue (if paired and connected with another device). becomes steadily blue (if ready to be paired). The indicator light will turn off. IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H12. Indicator Light Power Switch EAR CUSHIONS AND YO Your H12 headset is supplied with multiple ear cushions. Your headset's performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied ear cushions with your headset. The ear cushion is fitted onto the end of your headset's earpiece speaker like shown, and placed onto your ear when using your headset. OUR HEADSET When fitting an oval-shaped ear cushion on your headset, be sure the cushion is oriented, as shown below (pointing towards the microphone). WEARING THE HEADSET To wear your headset, flex the earhook and loop it over your ear, as shown. CHANGING FOR USE ON OTHER EAR You can wear your H12 headset on your left or right ear. To change the headset for the left ear: 1 Gently lift and pull the top of the earhook up and off speaker stem, as shown. 2 Flip the headset over. Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort. CHECKING BATTERY LEVEL While turned on and not on a call, you can check your headset's battery charge level by pressing and holding both Volume buttons. Note: This feature does not work when headset is in pairing mode. European Union Directives Conformance Statement Hereby, Motorola declares that this product is in compliance with: · The essential requirements and other relevant provisions of Directive 1999/5/EC. [. . . ] The ear cushion is fitted onto the end of your headset's earpiece speaker like shown, and placed onto your ear when using your headset. OUR HEADSET When fitting an oval-shaped ear cushion on your headset, be sure the cushion is oriented, as shown below (pointing towards the microphone). WEARING THE HEADSET To wear your headset, flex the earhook and loop it over your ear, as shown. CHANGING FOR USE ON OTHER EAR You can wear your H12 headset on your left or right ear. To change the headset for the left ear: 1 Gently lift and pull the top of the earhook up and off speaker stem, as shown. 2 Flip the headset over. Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort. CHECKING BATTERY LEVEL While turned on and not on a call, you can check your headset's battery charge level by pressing and holding both Volume buttons. Note: This feature does not work when headset is in pairing mode. European Union Directives Conformance Statement Hereby, Motorola declares that this product is in compliance with: · The essential requirements and other relevant provisions of Directive 1999/5/EC. · All other relevant EU Directives. The indicator light displays charge status until you release the buttons. [. . . ]