User manual MOTOROLA QG-HS820

[. . . ] 1 Quick Start Guide HS820 Bluetooth® Handsfree Headset CHARGE YOUR HEADSET Charge your headset for 2 hours: Release Tab Down 2 PUT YOUR HEADSET IN PAIRING MODE 2 PUT YOUR HEADSET IN PAIRING MODE CONTINUED seconds until the blue light turns on and remains on. 3 Before you can use your headset, you must pair (bond) it with your phone. Call Button Volume Buttons 2 Press and hold the Call E button for 6 to 10 NOTE: The blue light will flash as you press and hold the Call E button. [. . . ] Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www. hellomoto. com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809494A71 -A 3 TURN ON BLUETOOTH ON YOUR PHONE AND PAIR WITH HEADSET CONTINUED 4 TEST AND USE Your phone and headset are now paired and ready to make and receive calls. To make a call: QUICK TIPS To turn on the headset, press and hold the Call E button on your Bluetooth headset for 5 seconds. To adjust the volume, press the Volume buttons (shown in step 2) on the headset. NOTE: The Volume buttons are initially set up for wearing your headset on your right ear (like shown in step 2)--with the top button used to increase volume. You can set which button is used to increase volume by pressing and holding the desired Volume button (along with the Call E button) while turning on the headset. To turn off the headset, press and hold the Call E button on your Bluetooth headset for 5 seconds. The blue light will flash rapidly and then stop flashing. TROUBLESHOOTING My phone does not find my headset Make sure the blue light on your headset is on and steady when your phone is searching for devices (see step 2). Make sure your phone is on and the Bluetooth feature is turned on in your phone (step 3). If the Bluetooth feature has been turned off, you may need to restart the Bluetooth feature (see step 3) and pair your phone and headset again (see step 2). 8 Select BACK. 10 Select [Look For Devices]. NOTE: Do not select STOP---you will automatically be taken to the next screen. 1 Place the headset over your ear. [. . . ] All other product or service names are the property of their respective owners. 2005. To conserve battery power, turn OFF the headset when you will not be using it for an extended time. [. . . ]