User manual MOTOROLA QG-HT820

[. . . ] To pair: Your Headphones & Audio Device Your headphones are successfully paired with a device and ready to use when the blue indicator lights changes from steadily lit, flashes rapidly, and then slowly flashes. To confirm they are operating properly: 3 TEST AND USE 1 Make sure your headphones are turned off 1 Plug the Motorola charger into the (see Turning On and Off ) and press and hold the left side Call m button for 6 seconds until the indicator light turns on and remains steadily lit. Call Button with Indicator Light (Left Side) 1 Place the headphones on your head. See Wear the Headphones in this guide. o Bluetooth Enabled Phone headphones. [. . . ] All other product or service names are the property of their respective owners. 2005. o Your headphones are designed to be worn comfortably with the neck band positioned behind your head. Digital Signal processing is used for clear pickup of your voice during voice calls. Bluetooth Enabled Phone Note: The remote control functions only work when the headphones are directly connected to source device. via Bluetooth. To adjust the volume, press the + or - buttons on the left side of your headphones. To Skip Back to the previous song: Press the Skip Reverse Button < on the right side of your headset. To Skip forward to the next song: Press the Skip Forward Button > To Play, Pause, or Stop music: Press the Music Button M to play, pause, or stop the music. To connect non-Bluetooth Devices to your headphones: Use the headphone jack and the included cable. Bluetooth as a wireless technology could be subject to interference of other wireless traffic existing in your environment. If you experience audio interruptions while the headphone is connected to both music source and a Bluetooth phone, disconnecting the phone will eliminate the audio interruptions. Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/bluetooth and click Support. Features and Functions Guide HT820 Bluetooth® Stereo Headphones 1 PAIR with YOUR PHONE START BLUETOOTH Feature Step A PUT HEADPHONES IN PAIRING Make sure your headphones are turned off. If your headset is on, turn it off by pressing and holding the left side Call m button until the indicator light flashes 3 times (about 3 seconds). Music Button with Indicator Light (Right Side) Step B SET THE PHONE TO LOOK FOR YOUR HEADPHONES For most Motorola phones: 2 TEST AND USE Your Headphones & Phone Your phone's Bluetooth feature is off by default. So, to use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones: 1 Select M (Menu) > Settings > Connection > 1 Select M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. Note: Passkey cannot be changed from 0000. Your phone and headphones are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headphones over your ear. to call and press the Send key. Bluetooth Link > Setup. 2 3 Press OK or Yes to pair (link) the handsfree 4 2 On your phone, dial the number you want 3 If your phone and headphones are successfully paired, you will hear ringing in the headphones. IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your HT820. FOR MORE INFORMATION ON USING YOUR MOTOROLA HT820 Visit us at www. hellomoto. com/bluetooth and click Support. SUPPORT If you need more help, contact us at 1-877-MOTOBLU. 2 Scroll to Power. [. . . ] No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone Two tones Single tone Headphone Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute on / off Power on / off End a call Receive a call Reject a call Join a 3-way call (Note: Feature is phone/ network dependent. ) Redial last call Answer a second incoming call This symbol on a Motorola product means the product should not be disposed of with household waste. Please do not dispose of mobile telephones or electric accessories, such as chargers or headsets, with your household waste. Put an active call on hold or resume a call on hold Mute a call Status Power off Pairing mode Pairing successful Connected Note: Your HT820 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. [. . . ]