User manual MOTOROLA QIP6200

[. . . ] User Guide QIP6200/QIP64xx Series Set-TopTerminals High-Definition Watch and Record DVR CAUTION RISK OF ELECTRIC SHOCK CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphical symbols and supplemental warning marking locations on bottom of terminal. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This installation should be made by a qualified service person and should conform to all local codes. [. . . ] 4:3 PAN/SCAN fills the screen by cropping the left and right edges of wide screen programming. HDMI/YPbPr OUTPUT Sets the video display format for the component video outputs. Check the TV's user manual for more information about your TV's supported display formats. If you are not using a high-definition television with the QIP6xxx , selecting a format other than 480i causes the on-screen display to go blank. If this occurs, you can view the settings on the front panel display to change the YPbPr OUTPUT back to 480i. If you are not using the HDMI video connection, the HDMI/YPbPr OUTPUT setting displays as YPbPr OUTPUT. 14 QIP6200/QIP64xx User Guide Setting 4:3 OVERRIDE Description Sets the display format for 4:3 standard-definition programming. If the YPrPb OUTPUT is set to 1080i, 720p, or 480p, this setting defaults to 480i. If the YPrPb OUTPUT is set to 480i, this setting defaults to OFF and cannot be changed. Options are: · OFF displays non-high-definition programs having a 4:3 aspect ratio in wide screen format. Selecting OFF for a 4:3 TV may result in a small picture with black bars around it. 480i displays non-high-definition programs in their original 480i format. Some TVs cannot display 480i format on their component video inputs (YPbPr). 480p converts non-high-definition TV programs to a higher-quality 480p format. Some TVs cannot display 480p format on their component video inputs (YPbPr). Stretch automatically stretches all standard definition programming to fill your wide screen display. Stretch can only be selected if you have TV Type set to 16:9. · · · CLOSED CAPTION SERVICE SELECTION Turns closed captions on or off. Sets the service used for closed captions: · · Analog: CC1, CC2, CC3, CC4, T1, T2, T3, or T4. The default is PRIMARY LANGUAGE. FONT SIZE FONT STYLE Sets the font size for closed captions. Options are AUTO, MONO SERIF, PROPORTION SERIF, MONO NO SERIF, PROPORTION NO SERIF, CASUAL, CURSIVE, or SMALL. Sets the font color for closed captions -- AUTO, WHITE, BLACK, RED, GREEN, BLUE, YELLOW, MAGENTA, or CYAN. The default is AUTO. FONT COLOR 15 Setting FONT OPACITY Description Sets the opacity for closed captions -- AUTO, TRANSPARENT, TRANSLUCENT, SOLID, or FLASHING. Sets the edge appearance for closed captions -- AUTO, NONE, RAISED, DEPRESSED, UNIFORM, LEFT SHADOWED, or RIGHT SHADOWED. Sets the edge color for closed captions -- AUTO, WHITE, BLACK, RED, GREEN, BLUE, YELLOW, MAGENTA, or CYAN. [. . . ] If the set-top is set to 480i, graphics are available on all video outputs. If the set-top is connected to a standard definition TV, verify that the set-top is configured to use the 480i output mode. Verify that closed captions on the set-top have been enabled in the User Settings menu. If you are using an IEEE 1394 connection, on-screen graphics ­ including closed captions and program guides ­ will not be displayed. There are black bars to the right and left of the picture Wide screen TVs display 4:3 programs in this format unless set to Stretch. [. . . ]