User manual MOTOROLA T305

[. . . ] For most Motorola phones (at the main menu): 1 Press M (Menu) > Settings > Connection > Bluetooth Link > Setup. 1 Plug the Motorola charger into the charging port on the end of the hands-free speaker. The indicator light turns steadily red when the battery is charging and the hands-free speaker is turned off. When the hands-free speaker's battery is fully charged (about 2 hours), the indicator light turns steadily blue. 2 Scroll to Power. [. . . ] 2006. Your Phone Step B - SET YOUR PHONE TO LOOK FOR YOUR HANDS-FREE SPEAKER For most Motorola phones: 3 PAIR CONTINUED 4 TEST AND USE Your phone and hands-free speaker are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 On your Motorola phone, press M (Menu) > 1 Install visor clip and place hands-free speaker Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. onto your visor. See "Installing Hands-Free Speaker in Car" on the reverse side of this guide for details. call and press the Send key. 2 On your phone, dial the number you want to 3 If your phone and hands-free speaker are successfully paired, you will hear ringing on the hands-free speaker. 2 3 Select OK or Yes to pair your hands-free Select Motorola T305. 4 5 speaker with your phone. Enter the passkey: 0000 Select OK. When your hands-free speaker successfully pairs with your phone, the indicator light changes to flashing blue with quick purple flashes. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. After you have successfully paired your phone and hands-free speaker, you don't need to repeat these steps. For daily use, ensure that your hands-free speaker is turned ON and that your phone's Bluetooth feature is ON. To save battery power, your hands-free speaker will power down when not connected to your phone for more than 30 minutes. USING YOUR T305 See Features and Functions Guide on the reverse side for information on using your T305 TROUBLESHOOTING My hands-free speaker will not enter pairing mode. Make sure that any devices previously paired with the hands-free speaker are turned off. If the indicator light is flashing in blue, turn off the other device and wait for 10 seconds. The indicator light becomes steadily lit in blue indicating the hands-free speaker is now in pairing mode. Make sure the indicator light on your hands-free speaker is on and steadily lit in blue when your phone is searching for devices (see step 3). My hands-free speaker worked with my phone before but now they are not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and hands-free speaker again (see step 3). If you need more help, contact us at 1-877-MOTOBLU or visit us at www. hellomoto. com/Bluetoothsupport Features and Functions Guide T305 Portable Bluetooth® Hands-Free Speaker TURNING HANDS-FREE SPEAKER ON AND OFF To turn hands-free speaker on, press and hold the Power button until the indicator light turns purple. [. . . ] Note: When turning on your hands-free speaker during a phone call, audio is transferred automatically to your hands-free speaker (when your hands-free speaker and phone have previously been connected, and your phone supports this feature). Note: Your T305 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. INDICATOR LIGHTS With the Charger Plugged In Indicator Light Status Note: Charging status not displayed when hands-free speaker is in use. AUDIO TONES The audio tones provide information about your hands-free speaker status. [. . . ]