User manual MOTOROLA T720 CDMA

[. . . ] MORE HERE > Welcome Welcome to the world of Motorola digital wireless communications!We are pleased that you have chosen the Motorola T720 CDMA wireless phone. This reference guide is a companion to the user guide that is packaged with the Motorola T720 CDMA wireless phone. Refer to the user guide for general information about using the phone. [. . . ] Find the Feature M > Settings Press 1S 2 SELECT (+) To scroll to the charge time confirm your selection > Car Settings or Headset Note: This feature may not work with all car ignition switches. Press 1S 2 CHANGE (+) 3S 4 SELECT (+) To scroll to Auto Answer select Auto Answer scroll to On or Off confirm the setting Making Data and Fax Calls An optional Motorola OriginalTM data kit (which includes a cable connector) lets you transfer data between your phone and a computer, Palm OS® compatible device, or Microsoft Windows CE, Pocket PC, or Handheld PC device. You can: · Synchronize phonebook and datebook information between your phone and a computer or PDA. · Use your phone to send and receive data and fax calls on your computer or hand-held device. Getting More Out Of Your Phone Automatic Hands-Free You can set your phone to automatically route calls to a car kit when it detects a connection. Find the Feature M > Settings > Car Settings > Auto Handsfree Press 1S 2 SELECT (+) To scroll to On or Off confirm the setting Making a Cable Connection Installing the Software To transfer data between your phone and computer, you must install the software included with the Motorola Original data kit. See the data kit's user guide for more information. Power-Off Delay When your phone is connected to a car kit, you can set it to stay on for a period of time after you switch off the ignition. This prevents the phone from draining your vehicle battery, but leaves the phone on long enough that you do not have to re-enter your unlock code when making short stops. Find the Feature M > Settings Attaching the Cable Use a Motorola Original serial cable or Motorola Original USB cable to connect your phone to the external device. Check your computer or hand-held device to determine the type of cable you need. > Car Settings > Power-Off Delay Press 1S 2 SELECT (+) To scroll to the time delay confirm your selection Note: This feature may not work with all car ignition switches. Caution: If you select Continuous, the phone does not power off when you turn off the ignition. Be careful not to drain your vehicle battery if you select this option. 17 Serial Cable Action 1 Plug the serial cable into the detachable head. Make sure that the Motorola logo on the detachable head and the metal shielding on the serial cable plug are both facing you. 2 With the Motorola logo and the phone both facing you, plug the detachable head into the phone's accessory connector port. 3 Plug the other end of the cable into the serial interface connection on the device and tighten the screws, if present. USB Cable Action 1 Plug the end of the cable with the Motorola logo into the phone's accessory connector port. 2 Plug the other end--the USB connection--into the USB port on the external device. Sending a Data or Fax Call Use this procedure to send data or a fax from a connected computer or hand-held device. Action 1 Make sure that the phone is connected and powered on 2 Open the application (such as dial-up-networking or fax) on your computer, and place the call through the application Note: You cannot dial data or fax numbers through your phone's keypad. 3 When the transfer is complete, end the call from the connected device to close the connection Receiving a Data or Fax Call Use this procedure to transfer data or a fax to a connected computer or hand-held device. Getting More Out Of Your Phone Setting Up Your Phone Find the Feature M > Settings > Connection > Incoming Call Action 1 Press CHANGE (+) to select Next Call 2 Press S to scroll to Data In Only or Fax In Only 3 Press SELECT (+) to set the call format 4 Connect your phone to the device to enable the data or fax transfer Note: You cannot answer incoming voice calls when your phone is in data or fax mode. To return a voice call, reset your phone to normal voice operation as described below. Synchronizing Data You can synchronize phonebook and datebook information between your phone, computer, and PDA with Starfish TrueSync® software, a Motorola accessory product. Note: TrueSync software is designed to synchronize with basic features of many popular Personal Information Management (PIM) software and hardware products. Transferring the Data or Fax Your phone notifies you when the data or fax call arrives, and transfers the call to the connected device. Use the application running on the device to answer the call. Ending the Data/Fax Connection When the data or fax transfer is complete, end the call from the connected device to close the connection. Resetting Normal Voice Operation After making a data or fax call, you must reset your phone to resume normal voice operation. Find the Feature M > Settings > Connection > Incoming Call > Next Call > Normal Your phone also reverts to normal voice operation when you turn it off and then turn it back on. 18 Adjusting Network Settings Your service provider registers your phone to its network. [. . . ] Use the Contrast feature to change the level of contrast in your display. You can also use the Backlight feature to change the length of time that the display backlight stays on. See your Start Here guide. My TTY device doesn't work with my phone. How do I know if the data cable Also, your computer may have is ready to go? [. . . ]