User manual MOTOROLA T80

[. . . ] LED indicator will illuminate and remain illuminated as long as the radio is in the charger. LED indicator will illuminate and remain illuminated as long as the radio is in the charger. Wait 10 seconds until the unit automatically returns to “Normal” mode. Note: When you continue to transmit for 60 seconds, the radio emits TX Time Out tone and the icon flashes. [. . . ] 5 English Common Menu Your radio navigates through Common Menu as follows: Normal SCAN 2CH (Dual Watch) VOX ROOM (Room Monitor) TONE (Call Tone) SLNT (Silent) TIME (Up Timer) PWR (Power) Select the Channel and Sub-Code Off 1-5 Select the Sensitivity (1-5) 1 - 10 “N” or “Y” Select the ON/ 1H/2H/3H Scan Mode Dual Watch Mode Room Monitor Mode Up Timer Mode Group Menu Normal “GRP” (Group Mode) “CODE” (Group Code) “RING” (Ring Tone) “ID” (ID Setting) 1. Set ID Name The ID Name appears on the other radio’s display when you make an All Call or a Direct Call. The ID Name will also on the other radio’s display when they are placing a Direct Call. SEL/ Note: The radio cancels selected ID Number and entered ID Name, then exits from Group Menu when MENU/GRP button is pressed. Dual Watch Mode Enables your to scan the current channel and another channel alternately. Note: If you set the same channel and Sub-code as the current channel, Dual Watch doesn’t work. Room Monitor Enables your radio to detect voice/noises (according to the sensitivity level set) and transmit back to the listening radio without pushing the PTT button. The monitoring radio is not able to receive any transmissions in this mode. Note: When the voice/noise in the monitored room continues for more than 60 seconds, the monitoring radio stop monitoring for 5 seconds, and resumes. Features on Your Radio Channel Scan Mode Enables your radio to scan for active channels. When activity is detected, your radio lands (stays) on that channel for 2 seconds (5 seconds for VOX ON without headset). When activity on the landed channel ends, your radio continues scanning other channels. The backlight of the radio blinks when there’s an incoming call. If the call is not answered, the backlight turns off and the blinks until there is no signal. The silent mode will be disabled for 15 seconds when you transmit, receive or press any other buttons. Until until /”LOCK” appears to lock the /”UNLK” disappears to unlock LCD Backlight The LCD display will automatically illuminate for 10 seconds after any button is pressed (except for PTT). Monitor Mode Enables you to listen for weak signals on the current channel. To turn the Monitor Mode OFF: Press the MON, MENU/GRP or SEL/ “Normal” mode. Press and hold the button while turning the radio ON to turn the Roger Beep ON. Note: If a call is received, the ID Name will be indicated and then the radio will return to timer mode and the Call Icon will blink. 9 English Warranty Information The authorized Motorola dealer or retailer where you purchased your Motorola two-way radio and/or original accessories will honour a warranty claim and/or provide warranty service. Please return your radio to your dealer or retailer to claim your warranty service. [. . . ] ) Volumvrider med av/på-bryter Opp/ned-knapp for menynavigering Øvre snorfeste Norsk Knapp for LED-lykt -knapp (anrop) MON-knapp (Monitor, overvåkning) Høyttaler GRP/MENU-knapp (Menu/Group, meny/ gruppe) SEL/ -knapp (Select/Lock, velg/ lås) Mikrofon PTT-knapp (Push-To-Talk) 9 V DC-kontakt Nedre snorfeste Merknad: Den avbildede radioen er T80 Extreme. Indikator for stille Indikator for sending Indikator for mottak Indikator for tokanalsmodus Indikator for automatisk avslåing Indikator for tastelås Søkeindikator Indikator for kanal 9. 1–8 0–121 Talestyrt sending (VOX) Du starter sending ved å snakke inn i mikrofonen på radioen i stedet for å trykke på PTT-knappen. Eller for Auto Channel Change Setting (innstilling for automatisk endring av kanal). [. . . ]