User manual MOTOROLA TALKABOUT T62

[. . . ] To remove the battery compartment door, press the tab at the bottom of the compartment door. For NiMH battery pack, insert the battery pack with the and signs facing you. Plug the micro-USB cable into the micro-USB charging port on your radio. However, if power is on while charging, you may not be able to transmit a message if the battery is completely empty. [. . . ] This confirms that the radio is in Easy Pairing mode waiting to receive the Channel and Sub-Code settings from the Leader’s radio. € A group with many radios should have all users take this step at the same time, so all radios can be programmed in one go. On the Leader’s radio, press and hold down the until you hear a double beep. Button Dual Channel Monitor Enables you to scan the current channel and another channel alternately. Press the PTT button or wait until time out to activate Dual Channel Monitor. The screen will alternate between home channel and Dual Channel Monitor channel. Note: If you set the same channel and Sub-Code as the current channel, Dual Channel Monitor does not work. Note: • At the double beep, this radio’s Channel and Sub-Code settings will be transmitted, which will be received and copied by all the other (Members’) radios. € The Leader’s radio must make this transmission when all the Members’ radios are still in the Easy Pairing mode, otherwise the transmission will not be picked up. € On the Leader’s radio, user must remember not to release the button on the first (single) beep, otherwise this radio will become another Member’s radio. If that happens, you can press PTT to escape, and retry the steps described in #3 again. € If the Leader’s radio is set to a channel between 9 and 16, please ensure that all Members’ radios have channels 9 to 16 activated. € When a Member’s radio with only eight Channels is being EasyPaired by a Leader’s radio on Channel 9 or above, Easy-Pairing will fail, indicated by three short beeps, and “Err” is displayed briefly. Internal Voice Operated Transmission/ Voice Operated Transmission ( / ) Transmission is initiated by speaking into the microphone of the radio/audio accessory instead of pushing the PTT button. L3 = High Sensitivity for quiet environments L2 = Medium Sensitivity for most environments L1 = Low Sensitivity for noisy environments Keypad Tones You may enable or disable the keypad tones. Menu to continue Roger Tone You can set your radio to transmit a unique tone when you finish transmitting. It is like saying “Roger” or “Over” to let others know you have finished talking. You can turn the radio on and off, adjust the volume, receive, transmit, send a call tone, send Emergency Alert, and monitor channels when in the lock mode. Press Key Lock and hold until the Key Lock Indicator is no longer displayed to unlock the radio. Scanning Use the scan function to do the following: • Search all channels for transmissions from unknown parties. € Find someone in your group who has accidentally changed channels or • To quickly find unused channels for your own use. There is a priority feature and two modes of scanning (basic and advanced) to make your search more effective. [. . . ] Intern taleaktivert sending / taleaktivert sending ( / ) Du starter en sending ved å snakke inn i mikrofonen på radio-/lydtilbehøret i stedet for å trykke på PTT-knappen. L3 = høy følsomhet, for rolige omgivelser L2 = middels følsomhet, for de fleste miljøer L1 = lav følsomhet, for støyende omgivelser 87 Norsk (bokmål) Tastaturlyder Du kan aktivere eller deaktivere tastaturlydene. Trykk på PTT-knappen for å bekrefte eller på menyknappen for å fortsette å konfigurere. € Avansert skannemodus skanner alle kanaler for alle koder, finner en kode som er i bruk, og bruker den kodeverdien midlertidig for den kanalen. [. . . ]