User manual MOTOROLA XTR446

[. . . ] Make sure the cord is located so it will not be stepped on, tripped over, or subjected to damage or stress. Use of an improper extension cord could result in a risk of fire and/or electric shock. If an extension cord must be used, make sure: • That the pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger. € That the extension cord is properly wired and in good electrical condition, and • That the cord size is 18 AWG (1 mm2) for lengths up to 100 feet (30 metres) and 16 AWG (1. [. . . ] If you are in a group and you wish to talk to each other, all radios must be set to the same channel and code. If you experience interference and need to change channel, ensure that you change the channel and code of all radios in your group. Also inside some buildings Monitoring Channel Activity It is good radio etiquette to monitor the channel for activity before you transmit, to ensure that you do not interrupt other users already on the channel. Minimal range occurs when dense foliage and mountains obstruct the communication path. Obstacles that block the signal path may affect the strength of the incoming signal. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed channel number. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed memory number. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed channel number. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed code number. Interference Eliminator Code Interference eliminator codes help minimize interference by providing you with a choice of code combinations. Each of the channels, 1-8, may have any one of the codes, 00-38, selected. Code 00 indicates no code selected and your radio can receive a signal regardless of the code setting on the transmitting radio. Note: Handsets with different interference eliminator codes will not be able to communicate with each other. Use the VOL/CH side button (+) or (-) to increase or decrease the displayed code number. Fm Page 8 Monday, August 14, 2006 3:38 PM Scan English The scan facility allows you to easily scan all 8 channels. When an active channel is detected, the radio pauses on that channel until the channel is clear. To select the scanning function, press and hold CH/SCAN until SCAN is displayed. If you activate scan while your code is set to 00, then the radio will check for any activity on each channel, regardless of the code in use on that channel. If you activate scan while the code is set on 01 to 38, the radio will only check for activity on the specific channel and code combinations that are set on your radio. When activity is detected on a channel, the radio will stop scanning and you will hear whatever transmissions are detected. The radio’s display will show the channel and code on which activity was detected. If you want to respond to the transmission, press PTT while the scan is paused on that channel. [. . . ] Fm Page 14 Monday, August 14, 2006 3:38 PM English Motorola, and the Stylized M Logo are registered in the U. All other products or service names are the property of their respective owners. Fm Page 15 Monday, August 14, 2006 3:38 PM APPROVED ACCESSORIES LIST Please contact your dealer or retailer to purchase these accessories. Earbud with Push-To-Talk Microphone 00174 Discreet, lightweight earpiece with hand-operated lapel or collar mounted microphone. [. . . ]