User manual NAVMAN ICN 650

[. . . ] satellites orbit the earth at 20 , 200 kilometres (around 12 , 000 miles). While a GPS receiver can detect signals from up to 12 satellites at any time, only three signals are needed to provide a position or "GPS fix" (latitude and longitude) for vehicle navigation systems. Your iCN GPS antenna receives GPS signals and uses these to calculate your position on the maps stored on its memory card. to receive GPS signals , ensure that the iCN is outdoors , or in a vehicle outdoors , and the GPS antenna has an unobstructed view of the sky. [. . . ] Use the left and right Selection Buttons to scroll back and forth through the list of possible destinations. If you are at the top of the list, pressing the left Selection Button will bring you back to the previous screen. When you select a destination, your iCN will display the Destination screen, which clearly shows your chosen destination. NOTE: You can save this destination as a Favourite, use the 4-way toggle to select Save and press OK. Using your iCN, you can navigate to an area, the centre of a street, or a certain intersection. Use the 4-way toggle to select whether you want to search for an area or a street and press OK. You can change your country at any time using the Change Country button in the You Are Going To screen. Use the 4-way toggle and the OK button to decide if you want to go to the centre of the area or to find a street within that area. To delete a character, press the left Selection Button or select ; hold the left Selection Button to delete the line. When you have entered the first few characters of the name of the place you are seeking, or you can see it on the screen, press the right Selection Button. Character, press the left Selection Button or select ; hold the left Selection Button to delete the line. Press the left Selection Button to return to the previous screen without calculating a route. NOTE: You can save this destination as a Favourite; use the 4-way toggle to select Save and press OK. Map of entire route The Instruction List screen displays all of the turns of your route, the turn direction, the street name and the distance to the turn. A route must have been calculated for this screen to be able to display. The route can be scrolled through using the up and down buttons on the 4-way toggle. Your iCN automatically re-calculates your trip if you make a wrong turn or miss a turn. If the Next Instruction or Instruction List screens are open, a large question mark will be displayed while your iCN recalculates your route. If you have recorded a POI as a destination in your iCN, the next time you open the Points of Interest screen, that type of POI is listed. if you select a recent POI , the Select POI screen will display , listing nearby POIs of that type. Use the 4-way toggle to highlight the name of your destination and press OK. Use the left and right Selection Buttons to scroll back and forth through the list. [. . . ] The Smart Demonstration guides you through the functionality of your iCN. You can follow this demonstration to further familiarise yourself with your iCN. To cancel demonstration mode, return to this screen, highlight Demonstration Enabled and press OK. The following rules apply when searching for a destination in Europe: Problem I can't turn on my iCN while using battery power My iCN doesn't recognise the memory card Screen does not activate when I turn on my iCN Screen is hard to read I can't find the street I'm looking for The GPS isn't working Possible Cause The battery has insufficient charge Incorrect memory card inserted Recommended Solution Connect your iCN to a power source, then try to activate it. [. . . ]