User manual NAVMAN PIN300

[. . . ] This Quick Start Guide will help you get started with your PiN Pocket PC. Whether you travel in your own country or overseas, the PiN with SmartTM will direct you to your destination without the need for map books and second-hand instructions. The Smart map provides street level detail for door-to-door navigation, including Points of Interest (POIs) such as accommodation, railway stations and airports. ⷠUse this Quick Start Guide to install Smart for the first time. [. . . ] From the Map screen, enables you to zoom out to view more of the street map, but with less detail. Down From the D Map screen, with the Information button set to Angle, enables you to decrease the viewing angle. Use the stylus with the Pocket PC touch screen to navigate and use the Main Menu options, set destination addresses and configure the GPS status. See your Pocket PC manual for information on using the stylus with the touch screen. This screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with a North-pointing compass, the heading in degrees and ground speed. the GPS Status screen will display: · Yellow Segment -- a satellite is being tracked but is not being used · Red Segment -- a satellite is being used to determine a two dimensional (2D) position fix. ⷠGreen Segment -- a satellite is being used to determine a three dimensional (D) position fix. The circle under the satellite segments is green when there is a valid fix (2D or D), and red when there is no fix. While a 2D fix is sufficient to maintain a valid fix, a D fix is more accurate. COM Port drop down box which displays the selected GPS receiver or COM port Baud rate drop down box which displays the selected Baud rate for the GPS receiver COM port. North pointing compass Current heading in degrees Number of satellites used in GPS fix Ground speed A green circle indicates the GPS Receiver has a valid fix; A red circle indicates no valid fix Coordinated Universal Time (UTC) and date From the Map screen, push the 4-way toggle 2. Tap the first drop-down box and select the COM port for your GPS receiver from the list that appears. Tap the second drop-down box and select the baud rate (speed) for your GPS receiver from the list that appears. The following table explains the meaning of these messages and includes suggested actions. status Message GPS Port Closed Meaning A GPS COM port has not been opened. A GPS COM Port has been opened, GPS data is being received, but a GPS position fix has not yet been established. If you are in a vehicle with athermic (heat reflecting) windows, you will require an external GPS antenna (sold separately). Before you travel, you must specify a destination for SmartS to plan your route. Note: Depending on the country of destination, one or more fields may not be available when selecting your destination. To select a post code or zip code, type up to five characters of the post code in the Post Code box, or the zip code in the Zip Code box. Note: When navigating in the United Kingdom, type the post code with spaces, but without the last two letters. [. . . ] The following accessories are available for your PDA: Required for vehicles with heated windshields, and to boost GPS performance in weak signal areas. Connects to your computer and allows you to download maps to SD or MMC memory cards. Downloading maps to a memory card via a memory card reader can be faster than via your PDA. The Licensor grants to the Customer a non-exclusive licence to use: (a) one copy of the Software on one of the Customer's handheld devices; and (b) the accompanying materials, including any manuals contained in the Software (the Materials), in accordance with the terms and conditions of this Licence. [. . . ]