User manual NAVMAN TRACKFISH 6600

[. . . ] TRACKF I S H 6600 CHARTPLOTTER and FISHFINDER Installation and Operation Manual www. navman. com NAVMAN FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] The user card display has: File list A list of the files on any user card in the TRACKFISH. If there are more files than will fit on the display, press or to scroll up or down a page at a time. Waypts, Routes The number of waypoints and routes currently in the TRACKFISH. Track 1 to Track 5 The number of points in tracks 1 to 5 currently in the TRACKFISH. Note: To save TRACKFISH data onto the user card, use the Save command (see below). Data stored on the user card and shown on the file list is not available to be used by the TRACKFISH until loaded into the TRACKFISH with the LOAD command (see below). Saving data to the user card This saves all the TRACKFISH's waypoints, all the TRACKFISH's routes or one of the TRACKFISH's tracks to one file on the user card. The new file appears in the file list. Loading data from the user card to the TRACKFISH This loads one file from the user card to the TRACKFISH: A waypoints file: The new waypoints are added to any existing waypoints in TRACKFISH 6600 Installation and Operation Manual the TRACKFISH. If a new waypoint has the same name as an existing waypoint but has different data, the TRACKFISH displays both waypoints. Skip all: Do not load any new waypoints which have the same names as existing waypoints. all: Load all new waypoints which have the same names as existing waypoints; the new waypoints replace the existing waypoints. A routes file: The new routes are added to any existing routes in the TRACKFISH. If a new route has the same name as an existing route but has different data then the TRACKFISH asks which route to keep. A track file: The new track will replace the existing track in the TRACKFISH. 2 Press MENU and select Load. 47 NAVMAN Deleting a file from the user card 1 2 3 Select the file to delete. Select Yes to confirm. Formatting the user card Formatting prepares a user card for use. Format the card if there is an error message saying that the card is not formatted. 3 Select Yes to confirm. Reading the file information This reads the file names from the user card and displays them. 2 Select Read. Sorting the file names This sorts the displayed file names. Select sort by Name, Type or Time. 14 About display To show the about display, press DISPLAY, select Other, then select About. In the unlikely event of having to contact a Navman dealer for service, quote the software version number and date. 48 NAVMAN TRACKFISH 6600 Installation and Operation Manual 15 Setting up the TRACKFISH The TRACKFISH has a number of advanced features which are set up through the setup menu. We recommend that you become familiar with the operation of the unit using the default settings before making any changes to the data in these menus. Press MENU one or more times, to show the Setup menu, then select a particular option using the or cursor keys. [. . . ] Guangzhou, Hong Kong, Dalian, Qingdao, Shanghai 1701 Yanjiang Building 195 Yan Jiang Zhong Rd. Ph: +86 20 3869 8839 Fax: +86 20 3869 8780 e-mail: sales@peaceful-marine. com web: www. peaceful-marine. com India Access India Overseas Pvt. Ph: +91 120 244 2697 TeleFax: +91 120 253 7881 Mobile: +91 98115 04557 e-mail: vkapil@del3. vsnl. net. in Esmario Export Enterprises Block No. Ph: +91 40 2784 5163 Fax: +91 40 2784 0595 e-mail: gjfeee@hd1. vsnl. net. in web: www. esmario. com Korea Kumhomarine Technology Co. [. . . ]