User manual NAVMAN VHF 7200 MOUNT

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: · reorient or relocate the receiving antenna. · connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · consult the dealer or an experienced radio/TV technician for help. IMPORTANT: 1. Some features described in this manual are not available on every model. [. . . ] Select ON (on) or OFF (off) as desired. 16 NAVMAN VHF 7000, 7100US, 7100EU Operation Manual 2-6 GPS Simulator (SIMULATOR) The GPS Simulator is set to OFF whenever the radio is turned ON or whenever real GPS data is available through the COM port. However, if you want to test it, turn it on. MENU SELECT DSC SETUP RADIO SETUP >GPS SIM 1. Whenever the GPS Simulator is turned ON (on), simulated Speed Over Ground (SOG), Course Over Ground (COG), and LL position appear on the screen. This data is updated automatically during the simulation. It is not possible to send a DSC transmission when in Simulator mode. 2-7 Reset to Factory Defaults (RESET) Use this to return every setting to the factory defaults except all MMSID settings and the entries in your buddy list. MENU SELECT RADIO SETUP GPS SIM >RESET RESET RADIO ARE YOU SURE >YES NO 1. Select YES to reset the radio and return to the menu. VHF 7000, 7100US, 7100EU Operation Manual NAVMAN 17 Section 3 - Radio Setup Menu (RADIO SETUP) 3-1 Radio Setup Menu (RADIO SETUP) CH NAME RING VOLUME BEEP VOLUME INT SPEAKER WATCH MODE WX ALERT COM PORT Edit or delete channel names. Select NMEA protocol for communications between the VHF radio and any other instruments. See section 3-7. Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data. 3-2 Channel Names (CH NAME) RADIO SETUP >CH NAME RING VOLUME BEEP VOLUME CH NAME TELEPHONE The channel charts are listed in Appendix C with their default name tags. CH NAME gives you the option to edit or delete the channel name tags displayed on the screen. 01 TELEPHONE >EDIT DELETE EDIT CH NAME TELEPHONE EDIT CH NAME PHONE1 >YES NO 1. Use + or - to step through the channels with their name tags until you see the channel name tag you want to change, then press ENT. In this example, the channel name TELEPHONE associated with channel 01 is being changed to PHONE1. You can view your stored user MMSID at anytime by selecting USER MMSID in the main menu. 4-3 Maintain Your Groups (GROUP SETUP) Use GROUP SETUP to create, edit, or delete 1, 2, or 3 groups of frequently called people stored in alphanumeric order. A group MMSID always starts with 0. 4-3-1 Create a Group (GROUP SETUP) DSC SETUP USER MMSID >GROUP SETUP INDIV REPLY GROUP SETUP >MANUAL NEW 000000000 GROUP NAME ­­­­­­­­­­­­ GROUP MMSID 0­­­­­­­­ FISHER1 012345678 >STORE CANCEL 1. If this is the first time that you are entering a group name, a line of nine zeros appears. Press ENT to confirm each correct entry and to move to the next digit. When you have finished, press ENT repeatedly until the cursor moves to the MMSID line. If you make an error, press - until < appears, then press ENT to backup and correct the entry. Press ENT to store the details and return to the GROUP SETUP screen. 4-3-2 Edit Group Name Details GROUP SETUP MANUAL NEW >FISHER1 FRIENDS1 FISHER1 >EDIT DELETE EDIT NAME FISHER1 EDIT MMSID 012345678 FISHER2 012345678 >STORE CANCEL 1. The group name details are displayed, with the cursor at the first character of the name. Edit the buddy name or, to edit only the MMSID, press ENT repeatedly until the cursor moves to the MMSID line. When you are finished, press ENT (repeatedly if necessary) to display the next screen. Press ENT to store the changes and return to the GROUP SETUP screen. 22 NAVMAN VHF 7000, 7100US, 7100EU Operation Manual 4-3-3 Delete a Group GROUP SETUP MANUAL NEW >FISHER2 FRIENDS1 FISHER2 EDIT >DELETE DELETE GROUP FISHER2 >YES NO 1. [. . . ] Ph: +56 2 698 0055 Fax +56 2 698 3765 e-mail: mmontecinos@equimar. cl Mera Vennik Colon 1148, Talcahuano, 4262798, Chile. Ph: +56 41 541 752 Fax +56 41 543 489 e-mail: meravennik@entel. chile. net CENTRAL AMERICA Mexico Mercury Marine de Mexico Anastacio Bustamente #76 Interior 6 Colonia Francisco Zarabia, Zapapan, Jalisco, C. P. Ph: +52 33 3283 1030 Fax: +52 33 3283 1034 web: www. equinautic. com. br ASIA China Peaceful Marine Electronics Co. Guangzhou, Hong Kong, Dalian, Qingdao, Shanghai 1701 Yanjiang Building 195 Yan Jiang Zhong Rd. [. . . ]