User manual NEXTBASE IN CAR CAM 101 GO

[. . . ] Instruction Manual TABLE OF CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 PRODUCT SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 PRODUCT FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] - Always use the supplied car adaptor cable to supply 5Vdc to the iN-CAR CAM. 11 INSTALLATION NOTES Please read and follow the notes below for safe operation of your iN-CAR CAM within your vehicle. As per the supplied installation instructions, it is advised to install the iN-CAR CAM so it does NOT obstruct the drivers view of the road, preferably on the passenger side of the vehicle and behind the rear view mirror. Whilst the iN-CAR CAM clearly needs to view through the windscreen in an area swept by the windscreen wipers, the iN-CAR CAM should be installed so as not to intrude significantly within the wiped area. A 40mm intrusion into the wiped area is the maximum recommended. Do NOT mount the iN-CAR CAM in front of the driver, as depicted by the red area in the above illustration. When installing the iN-CAR CAM in a vehicle, always place the device securely against the windscreen and where possible conceal the power cable under trim. Make sure that the iN-CAR CAM power cable does not interfere with the drivers operating controls, such as the steering wheel, pedals or gear levers. Do NOT mount the iN-CAR CAM in front of an airbag field of deployment or in a position to obscure any mirrors. Clean the windscreen at the point of location, prior to fitting the iN-CAR CAM, also, applying some moisture to the suction cup may be beneficial, to ensure absolute adhesion. The automatic Start-Stop technology incorporated within the device negates any need to operate the controls whilst driving. Adjust any settings or review recordings whilst stationery, not whilst driving. After the preliminary SETUP has been carried out upon the iN-CAR CAM, adjust the Screen Saver setting to 10 Seconds, this will blank the screen automatically shortly after starting the vehicle and the screen will NOT be a distraction in any way to the driver. 12 VIDEO MODE The key below explains the various information displayed on the screen when your iN-CAR CAM is in Video mode, some icons will only be displayed once the relevant function has been selected within the Video menu, as described further down this page. 1 2 3 4 SD REC 10 9 00:02:51 HD 8 7 6 5 1. Power Source Indicator: Displays whether the iN-CAR CAM is powered via the car adaptor (as illustrated above) or the internal battery. Protected File Icon: Displayed when a video file has been protected by activation of the internal G Sensor or the SOS button on the iN-CAR CAM. Audio Recording Icon: Shown on screen when Audio Recording is on, when off the icon will remain on screen but be marked red. Image Count: Displays number of images that can be stored on the memory card based on current resolution setting. Power Source Indicator: Displays whether the iN-CAR CAM is powered via the car adaptor (as Illustrated above) or the internal battery. Resolution: Displays the image size. 16 PHOTO MODE SETTINGS To access the Photo Mode settings press the MENU (M) button, use the up and down buttons to select the required option and press OK to view available settings. To change a setting, select the chosen option using the up and down buttons and press the OK button to confirm. Resolution Select the image resolution, this will increase or decrease the quality and file size of the image. Date & Time Stamp Turn On / Off the date and time stamp shown on recorded files. Options: On or Off Default Setting: On 17 PLAYBACK MODE - VIDEO FILES The key below explains the information displayed on the iN-CAR CAM screen, when a video is viewed within Playback Mode. 1 2 3 00:02:12 00:00:00 8 SD HD 100-0001 7 1. 8. 6 5 4 Video Icon: Indicates the iN-CAR CAM is viewing a video file. [. . . ] Do not stick to glass that has any non-smooth effect or paint whatsoever. Check that the car adaptor LED indicator is illuminated (red), if not then inspect the car adaptor fuse. Replacement 2A 20mm fuses are available from your local electrical retailer. For best recording use a branded class 10 type (30MB/s) MicroSD card of 8 to 32GB recommended size. [. . . ]