User manual NIKON COOLSCAN 8000ED

[. . . ] En Setup Device Registration (Windows Only) Scanning Film Holders for the 8000 ED Nikon Scan Reference User's Manual Install Nikon Scan scanner driver software The procedure for installing the software differs depending on whether you are using a Windows or Macintosh computer. Windows Macintosh See See 16 21 Scanning Guide Set up the scanner and connect it to your computer Windows users will need to register the scanner with Windows when connecting the scanner for the first time. Registration of the scanner as a new device is necessary only under Windows. Connect the scanner See Register the scanner See 25 27 Place the film to be scanned in a film holder Different holders are used for different types of film. [. . . ] Open the System Properties dialog From the Start menu, select Settings > Control Panel and double-click the System icon. Display the Device Manager The System Properties dialog will be displayed. Open the Hardware tab and click Device Manager. . . . 4 Confirm that the scanner is listed under "Imaging devices" If "Imaging devices" appears in the Device Manager, click the "+" to its left to view the imaging devices currently registered with Windows. If the Scanner Is Not Listed If the scanner is not listed under "Imaging devices, " proceed to "Updating the Device Driver (Windows 2000 Professional)" ( 40). 38 5 Confirm that the scanner is working properly Double-click the listing for your scanner that appears under "Imaging devices. " The scanner Properties dialog will be displayed. Click the General tab and confirm that "This device is working properly" appears under "Device Status. " If another message is displayed, proceed to "Updating the Device Driver (Windows 2000 Professional)" ( 40). 39 Updating the Device Driver (Windows 2000 Professional) If the scanner is not listed under "Imaging devices" in the Device Manager or the message "This device is working properly" does not appear in the Properties dialog, you will need to reinstall the device driver as detailed below. 1 2 Open the scanner Properties dialog Display the Device Manager as described in steps 1­3 of "Confirming Device Registration 38). If the scanner is listed under "Other devices" or (Windows 2000 Professional)" ( appears next to a "!", "?", or "×", double-click the entry for the scanner to display the scanner Properties dialog. Open the Driver tab and click Update Driver. . . . 3 Click Next When the Upgrade Device Driver wizard is displayed, click Next. 40 4 Select the search option Select the search option and click Next. 5 Insert the Nikon Scan 3 CD Holding down the shift key to prevent the Welcome program from starting automatically, insert the Nikon Scan 3 CD into the CD-ROM drive. The Welcome Window If the Welcome program starts automatically when you insert the Nikon Scan CD, click Exit to close the Welcome window. 6 7 Reinstall the drivers Reinstall the drivers as described in steps 3­8 of "Registering the Scanner with Windows 2000 Professional" ( 35­37). Click Finish When the Wizard displays a message stating that it has found the drivers for your scanner, click Finish to complete installation. If prompted to restart the computer, click Yes. 8 Confirm device registration Confirm that the scanner has been correctly registered with the system as described in "Confirming Device Registration (Windows 2000 Professional)" ( 38­39). 41 Windows Millennium Edition (Me) Registering the Scanner with Windows Me 1 Turn the scanner on The first time the computer detects the scanner, Windows will display the dialog shown at right. After confirming that the Nikon Scan CD is inserted in the CD-ROM drive, select the search option and click Next. Inserting the Nikon Scan CD If the Nikon Scan CD is not in the CDROM drive, insert the disk while holding down the shift key to prevent the Welcome program from starting automatically. 2 Select LS8000ME. INF Select LS8000ME. INF in the list of drivers and click OK. "LS8000ME. INF" Several drivers with similar names may be displayed. Be sure to select LS8000ME. INF. The Welcome Window If the Welcome program starts automatically when you insert the Nikon Scan CD, click Exit to close the Welcome window. 42 3 Click Finish Click Finish to complete installation. 4 5 Restart the computer Click Yes to restart the computer. Confirm device registration Confirm that the scanner has been correctly registered with the system as described in "Confirming Device Registration (Windows Me)" ( 44). 43 Confirming Device Registration (Windows Me) After registering the scanner, confirm that the device is working normally as described below. 1 2 3 Turn the scanner on Make sure that the scanner is connected and turned on. Open the System Properties dialog From the Start menu, select Settings > Control Panel and double-click the System icon. Display the Device Manager The System Properties dialog will be displayed. Open the Device Manager tab. 4 Confirm that the scanner is listed under "Imaging Device" If "Imaging Device" appears in the Device Manager, click the "+" to its left to view the imaging devices currently registered with Windows. If the Scanner Is Not Listed If your scanner is not listed under "Imaging Device, " proceed to "Updating the Device Driver (Windows Me)" ( 46). 44 5 Confirm that the scanner is working properly Double-click the listing for your scanner that appears under "Imaging Device. " The scanner Properties dialog will be displayed. Click the General tab and confirm that "This device is working properly" appears under "Device Status. " If another message is displayed, proceed to "Updating the Device Driver (Windows Me)" ( 46). 45 Updating the Device Driver (Windows Me) If the scanner is not listed under "Imaging Device" in the Device Manager or the message "This device is working properly" does not appear in the Properties dialog, you will need to reinstall the device driver as detailed below. 1 2 Open the scanner Properties dialog Display the Device Manager as described in steps 1­3 of "Confirming Device Registration (Windows Me)" ( 44). If the scanner is listed under "Other devices" or appears next to a "!", "?", or "×", double-click the entry for the scanner to display the scanner Properties dialog. Open the Driver tab and click Update Driver. . . . 3 Insert the Nikon Scan 3 CD The Upgrade Device Driver wizard will be displayed. Holding down the shift key to prevent the Welcome program from starting automatically, insert the Nikon Scan 3 CD into the CD-ROM drive. [. . . ] Film may be scanned in one or two strips of up to six frames or as 35-mm slides using mounts 1. 0­3. 2 mm thick. Up to three frames of panorama film with frame sizes of 24 × 58 mm or 24 × 65 mm can also be scanned. · Medium-format (Brownie) film: Positive or negative, 6 × 4. 5, 6 × 6, 6 × 7, 6 × 8, or 6 × 9 film may be used, either in strips of four (6 × 4. 5), three (6 × 6), or two (6 × 7, 6 × 8, or 6 × 9) frames or as mounted slides 1. 0­3. 2 mm thick. · 16-mm film: Positive and negative film, both color and monochrome, may be used. [. . . ]