User manual NIKON F80

[. . . ] (En) INSTRUCTION MANUAL En Nomenclatur e Depth-of-field preview button (P. 67) Film confirmation window Data imprint LCD panel/ buttons (F80D/F80S only) (P. For the F80S's camera back, see page 90. Supplied accessories Film advance mode selector (P. 68) 3 LCD Panel/V iewfinder Display · LCD panel Shutter speed/ Exposure compensation value Bracketing bar graphs (P. [. . . ] When Dynamic AF Mode with Closest Subject Priority (page 40) is selected in Spot Metering, exposure is locked at centre focus area (page 49). 58 · The following functions can be operated while the , button is kept pressed: 1. Aperture adjustment in Aperture-Priority Auto Exposure mode In any of these three situations, controlled shutter speed and/or aperture will be displayed after change. · Rotating the metering system selector to another setting does not change the metering system during Auto Exposure Lock operation. (The metering system changes as soon as the Auto Exposure Lock is cancelled. ) Auto Exposure Lock can be set to be activated by lightly pressing the shutter release button (page 72). c 11: Auto Exposure Lock can be set to remain after you remove your finger from the , button. In this case, AE lock is released when the , button is pressed again (page 73). c 7: 59 Exposure Confirm focus indicator / appears in the viewfinder. Exposur e Compensation · To modify exposure control (i. e. This can be useful when intentionally achieving under- or overexposure. Exposure compensation can be performed in any exposure mode. (However in Manual exposure mode, only the electronic analog display changes--selected shutter speed and aperture do not change. ) Auto Exposur e Bracketing · Auto Exposure Bracketing allow you to shoot in selected compensated EV value (maximum of ±2 EV) shifting from the automatically set proper exposure (or selected exposure in Manual exposure mode) for a selected number of shots (two or three) each time the shutter is released. For example, this is useful in selecting one shot out of several shots with Bracketed exposures after processing the film, when the subject has pronounced contrast in shooting with colour slide film and where the latitude of the proper exposure is minimal. Auto Exposure Bracketing can be performed in any exposure mode. rotating the 1 Set exposure compensation bythe buttonMain- the Command Dial while pressing until desired compensation value appears (­3 EV to +3 EV in 1/2 steps). Electronic analog exposure display ­0. 5 EV compensation Dial while pressing the 1 Rotate the Main-Command¸ button so z appears Auto Exposure Bracketing in the LCD panel. +2 EV compensation · When the exposure compensation is set, = appears in the LCD panel and viewfinder. The Electronic analog exposure display also appears in the viewfinder. · Electronic analog exposure display indicates the exposure compensation value and 0 blinks. · Normally, you should compensate exposure to the + side when the background is brighter than your main subject, or to the ­ side when the background is darker. · See page 85 for flash exposure compensation where only the flash output level is compensated. · Shutter speed and aperture in Auto-Multi Program, aperture in ShutterPriority Auto and shutter speed in Aperture-Priority Auto and Manual exposure mode differ. · In any of the exposure modes, Flash Exposure Bracketing and Auto Exposure Bracketing are simultaneously performed when a Speedlight is used. 2 Compose picture, focus and shoot. the number of shots and compensated EV value 2 Setrotating the Sub-Command Dial while pressing the by Auto Exposure Bracketing ¸ button. 60 · To cancel exposure compensation, rotate the Main-Command Dial while pressing the button to reset the compensation value to 0. 0. (Turning the power switch off does not cancel the exposure compensation function. ) · See the table on the next page for the combinations of the number of shots and compensated EV value. 61 Exposure Auto Exposur e Bracketing --continued · Rotating the Sub-Command Dial while pressing the Auto Exposure Bracketing button ¸ changes the setting as follows: Number of shots and compensated EV value 3F 0. 5 3F 1. 0 3F 1. 5 3F 2. 0 @2F 0. 5 @2F 1. 0 @2F 1. 5 @2F 2. 0 ^2F 0. 5 ^2F 1. 0 ^2F 1. 5 ^2F 2. 0 Bracketing bar graphs Bracketing order 0, 0, 0, 0, ­0. 5, +0. 5 ­1. 0, +1. 0 ­1. 5, +1. 5 ­2. 0, +2. 0 0, +0. 5 0, +1. 0 0, +1. 5 0, +2. 0 0, ­0. 5 0, ­1. 0 0, ­1. 5 0, ­2. 0 Multiple Exposur e · Multiple exposure consists of two or more exposures of one or more subjects in the same frame. Multiple exposure can be performed in any of the available exposure modes. and set the film advance mode selector to Z 1 Rotatepressing the film advance mode selector lock while release. · Z appears in the viewfinder. c 3: Bracketing order can be set to change from negative EV value to positive EV value (page 71). the Main-Command pressing the 2 Rotate to set the necessary Dial while compensation. button exposure Exposure 3 Compose picture, focus and shoot. · Compensated shutter speed and aperture values are displayed during shooting. [. . . ] 0. 75x with 50mm lens set to infinity (at ­1. 0m­1) ­1. 8m­1 to +0. 8m­1 Focus indications, metering system, AE lock, shutter speed, aperture, exposure mode, electronic analog exposure display/exposure compensation display, exposure compensation, frame counter/ exposure compensation value, ready-light, multiple exposure, focus area, flash exposure compensation, five sets of focus brackets (area)/Spot Metering area, 12mmø reference circle for Centre-Weighted metering, On-Demand Grid Lines able to display Automatic, instant-return type Focus area AF Area mode Focus lock Metering system Metering range Viewfinder Eyepoint Focusing screen Viewfinder frame coverage Finder magnification Dioptre adjustment Viewfinder information Exposure meter coupling CPU Exposure compensation Auto Exposure Lock Auto Exposure Bracketing Film speed setting Exposure compensated in ±3 EV range, in 1/2 steps Detected exposure value locked by pressing , button Bracketing range: ±2 EV; number of shots: two or three; bracketing steps: 0. 5, 1, 1. 5 or 2 EV · DX or manual selectable · Film speed range: DX: ISO25-5000, Manual: ISO 6-6400 in 1/3 steps Reflex mirror 104 105 Miscellaneous Specifications --continued Shutter Release terminal Shutter speeds Electronically controlled vertical-travel focal-plane shutter Available on the shutter release button · In ¡, £: 30 to 1/4000 sec. (in 1/2 steps), buLb X-contact only; flash synchronisation up to 1/125 sec. Activated by pressing Speedlight lock-release button, guide number: 12 (at ISO 100, m); flash coverage: 28mm or longer lens; film speed range: ISO 25 to ISO 800 Controlled by five-segment TTL Multi Sensor · Automatic Balanced Fill-Flash with TTL Multi Sensor: 3D Multi-Sensor Balanced Fill-Flash and Multi-Sensor Balanced Fill-Flash · Standard TTL · Film speed range: ISO 25-1000 * See pages 78-79 and 86-87 for details. Front-Curtain Sync (normal sync), Red-Eye Reduction, Red-Eye Reduction with Slow Sync, Slow Sync, Rear-Curtain Sync Lights up when flash fully charged with built-in Speedlight, SB-80DX, SB-50DX, SB-30, SB-29s/29, SB-28/28DX, SB-27, SB-23, etc. ; blinks (3 sec. [. . . ]