User manual OLYMPUS DS-150

[. . . ] OLYMPUS OPTICAL CO. , LTD. San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan. 03-3340-2211 OLYMPUS AMERICA INC. Two Corporate Center Drive, Melville, NY 11747-3157, U. S. A. 516-844-5000/1-800-622-6372 OLYMPUS OPTICAL CO. (EUROPA) GMBH. (Premises/Goods delivery) Wendenstrasse 14-16, 20097 Hamburg, Germany. 040-237730 (Letters) Postfach 10 49 08, 20034 Hamburg, Germany. OLYMPUS OPTICAL CO. (U. K. ) LTD. 2-8 Honduras Street, London EC1Y0TX, United Kingdom. [. . . ] The recorder will automatically stop at the end of the message if the STOP button is not pressed beforehand. In the Stop mode, press the INDEX/FOLDER button to select the folder containing the message you want to play back. Press the Up/Down control (Forward Skip and Reverse Skip) on the MENU switch until the number of the message you want to listen is displayed on the LCD panel. (For information on Forward Skip and Reverse Skip, see pages 20 and 21. ) Press the Play button ¸. Adjust the playback volume with the Up/Down control on the MENU switch. At the beginning of each recorded message, the time and date of the recording is displayed on the LCD panel for 2 seconds. Connect the earphone to the EAR jack to listen to playback through the earphone. The recorder will stop automatically when a message has been played back to the end. A warning alarm will sound if you have reached the end of the recorded messages in the folder. Press and hold the REC button for less than a second during playback to enter the PlaybackPause mode. 10Press and hold the REC button for less than a second in the Playback-Pause mode to resume playback. CUE Press and hold the Fast-Forward button during playback to activate the Cue mode. As long as you keep the button is pressed, you will be able to hear the message while it is fast-forwarded. When the Fast-Forward button is released, normal playback starts automatically. The recorder will stop automatically when the end of the message is reached. FAST REVERSE Press the Fast Reverse button ¹ in the Stop mode to fast reverse the message. The recorder will automatically stop at the end of the message if the STOP button is not pressed beforehand. 18 19 REVIEW Press and hold the Fast Reverse button during recording or playback to activate the Review mode. As long as you keep the button is pressed, you will be able to hear the message while it is fast reversed. When the Fast Reverse button is released or the beginning of the message is reached, normal playback starts automatically. REVERSE SKIP Press the Fast Reverse button during fast reversing to skip to the beginning of the current message. If the Fast Reverse button is pressed again within 2 seconds of a reverse skip, the recorder will skip to the beginning of the previous message and stop. tReverse skip can also be initiated in the Stop mode using the Up/Down control on the MENU switch (in the down direction). FORWARD SKIP Stop mode Press the Fast-Forward button during fast-forwarding to skip to the beginning of the next message. If the Fast-Forward button is pressed again within 2 seconds of a forward skip, the recorder will skip to the beginning of the next message and stop. If forward skip is executed at the last message, a new message number and [NEW] will appear on the LCD panel. tForward skip can also be initiated in the Stop mode using the Up/Down control on the MENU switch (in the up direction). Stop mode Message No. 3 Non-recorded section Pressing fast reverse button Fast reverse Pressing fast reverse button during fast reverse Pressing fast forward button Fast forward Reverse skip and stop Reverse skip and stop Pressing fast reverse button within 2 sec. Pressing fast forward button during fast forward Forward skip and stop Pressing fast forward button within 2 sec. Skip and stop NEW displayed on LCD 20 21 ERASE 1. [. . . ] The Move Message mode is canceled when the STOP button is pressed or when no operation is performed for 4 seconds after the Move Message menu is displayed. ERASE ALL (execution) See page 23. 30 k Second menu 1. Alarm setting (ON/OFF) : See page 28. Formatting Under normal use, it is not usually necessary to format the built-in flash memory since it is formatted before shipment from the factory. To restore the memory to its original condition, follow the procedure below to format the memory. [. . . ]