User manual OLYMPUS PT-042

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OLYMPUS PT-042. We hope that this OLYMPUS PT-042 user guide will be useful to you.


OLYMPUS PT-042 : Download the complete user guide (17656 Ko)

Manual abstract: user guide OLYMPUS PT-042

Detailed instructions for use are in the User's Guide.

[. . . ] Q11: A11: Q12: PT-042 A12: 1 PT-042 POL-042 PT-042 2 PSOLG-1/2/3 3 SILCA-5S 5 4 PFUD-07 Jp JP 37 Jp PT-042 1020/Stylus 1020/1010/Stylus 1010 40m 62mm 138mm × 100mm ×104mm 455g JP 38 En Thank you for buying the Underwater Case PT-042. Please read this instruction manual carefully and use the product safely and correctly. Wrong use may cause damage to the camera inside the Case due to water leakage, and repair may not be possible. The PT-042 Underwater Case is designed for µ 1020/Stylus 1020/ µ 1010/Stylus 1010. [. . . ] Installation Strongly push the mounting projections of the LCD hood as shown in the figure into the guides above and below the LCD monitor window. En Removal Remove the mounting projections of the LCD hood from the guides above and below the LCD monitor window by widening the LCD hood. Visual Inspection After sealing the Case, check the sealing part of front and rear lid visually to confirm that the O-ring is not twisted or out of the groove and that no foreign matter has been caught. CAUTION: Hairs, fibers, and other narrow items are not very apparent, but they may cause entry of water. EN 21 Final test (water leakage test) The final test after loading the camera is explained below. This is the only way to eliminate worry about possible entry of water!En 1 Simple water immersion test Place the Case slowly into the water. Explanatory image Hints As the Case is transparent, waterdrops entering into it can be confirmed easily. In case of trouble with the O-ring, three seconds are enough for water to enter. Remove the Case from the water and check that no water has accumulated at the bottom of the Case. Remove the Case from the water and check that no water has accumulated at the bottom of the Case. As the inside can be seen, the inspection for entry of water also can be made easily!Taking Pictures Under Water How to use the hand strap Pass your hand through the hand strap provided and adjust the length with the stop button. Hold the Case securely with both hands and press the shutter lever gently to prevent camera shake. Cautions when using the flash When taking macro pictures on the wide-angle side, the flash light may be missing in some parts or the light volume may not be uniform. During underwater shooting, shooting conditions (water clarity, suspended matter, etc. Underwater Shooting According to the Scene Type En The camera incorporates the following shooting scene modes. Underwater shooting modes kUnderwater Wide-Angle 1 Suitable for shooting a scene that extends across a wide range such as a school of fish swimming through the water. (Examples) lUnderwater Wide-Angle 2 Suitable for shooting a large, fast moving subject such as a dolphin or manta ray. In many dolphin-watching locations, use of a flash is not permitted to avoid frightening the dolphins. Although this mode was originally designed to work without the flash, it can also be enabled if required, for example when shooting a manta ray. HUnderwater Macro Suitable for close-up shooting of small fish and other underwater creatures. [. . . ] 3 Damage, deterioration or deformation of the O-ring 4 Sand, fibers, hair or other foreign matter on the O-ring 5 Sand, fibers, hair or other foreign matter on the O-ring groove or the O-ring contact surface 6 Catching of the strap, the bag of silica gel, etc. When sealing the Case 7 Throwing the Case from a boat into the water, jumping with the Case into the water, or other sudden application of strong forces onto the Case. When entering the water, hand the Case over gently or avoid impacts in other ways. 1 Never use alcohol, thinner, benzene or similar organic solvents or chemical detergents to clean the O-ring. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS PT-042




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS PT-042 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.