Detailed instructions for use are in the User's Guide.
[. . . ] Contents
AV Receiver
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
HT-R590
Instruction Manual
Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning On & Basic Operations . . . . . . 18
Advanced Operations . . . . . . . . . . . . . . . . . 34
Controlling Other Components . . . . 45
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference.
En
Introduction
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings.
Note · The on-screen setup menus are displayed when: There is no video input, or The video input is 480p, 576p, 720p, 1080i, or 1080p. Remote indicator
Hardware ( page 41)
Volume OSD Remote ID AM/FM Freq Step Auto Standby
HDMI Setup ( page 42)
HDMI Ctrl (RIHD) HDMI Through Audio TV Out Audio Return Ch LipSync
Common Procedures in Setup Menu
RECEIVER
Setup Menu 1. HDMI Setup HDMI Input ( page 35)
BD/DVD VCR/DVR CBL/SAT GAME AUX TUNER TV/CD
BD/DVD VCR/DVR CBL/SAT GAME AUX TUNER TV/CD
ENTER // / SETUP RETURN
Sp Distance ( page 37)
Unit Left Front High Left Center Front High Right Right Surround Right SurrBack Right SurrBack Left Surround Left Subwoofer
The on-screen setup menus appear on the connected TV and provide a convenient way to change the AV receiver's various settings. Carry out the settings by using the on-screen display.
1
Press RECEIVER followed by SETUP.
Tip · If the main menu doesn't appear, make sure the appropriate external input is selected on your TV.
Component ( page 35)
BD/DVD VCR/DVR CBL/SAT GAME AUX TUNER TV/CD
Level Cal ( page 37)
Left Front High Left Center Front High Right Right Surround Right SurrBack Right SurrBack Left Surround Left Subwoofer
2 3
Use / to select a menu, and then press ENTER. Press RETURN to return to the main menu.
Digital Audio ( page 35)
BD/DVD VCR/DVR CBL/SAT GAME AUX TUNER TV/CD
Audio Adjust ( page 37)
Input Ch (Mux) Input Ch (Mono) Panorama Dimension Center Width Height Gain Dolby EX Center Image Listening Angle
Note · This procedure can also be performed on the AV receiver by using SETUP, arrow buttons, and ENTER. · During Audyssey 2EQ® Room Correction and Speaker Setup, messages, etc. , that are displayed on the TV screen will appear in the Display.
Explanatory Notes
Menu Sp Config
Sp Config ( page 36)
Subwoofer Front Center Surround Front High Surround Back Surround Back Ch Crossover Double Bass
Source Setup ( page 39)
Audyssey Dynamic EQ Reference Level Dynamic Volume A/V Sync Name Audio Selector Fixed Mode
Subwoofer Yes No Menu selection Setting target Setting options (default setting underlined)
En
34
HDMI Input
Menu HDMI Input
If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign "HDMI2" to the "BD/DVD" input selector. Here are the default assignments.
Input selector BD/DVD VCR/DVR CBL/SAT GAME AUX TV/CD Default assignment HDMI1 HDMI2 HDMI3 HDMI4 ---------
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD IN1, IN2: Select a corresponding component video input that the video component has been connected. - - - - -: Select if you're not using the COMPONENT VIDEO OUT.
Digital Audio (Digital Audio Input)
Menu Digital Audio
If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1, you must assign "OPTICAL1" to the "TV/CD" input selector. Here are the default assignments.
Input selector BD/DVD VCR/DVR CBL/SAT GAME AUX TV/CD Default assignment COAXIAL1 ----COAXIAL2 OPTICAL1 ----OPTICAL2
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD HDMI1, HDMI2, HDMI3, HDMI4: Select a corresponding HDMI input that the video component has been connected. When HDMI1 - HDMI4 have already been assigned, you must set first any unused input selectors to "- - - - -", or you will be unable to assign HDMI1 - HDMI4 to input selector.
Note · When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. · Do not assign the component connected with the HDMI input to TV/CD selector when you set "HDMI Ctrl (RIHD)" setting to "On" ( page 42). Otherwise, appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD COAXIAL1, COAXIAL2, OPTICAL1, OPTICAL2: Select a corresponding digital audio input that the component has been connected. - - - - -: Select if the component is connected to an analog audio input.
Note · When an HDMI IN is assigned to an input selector in "HDMI Input" ( page 35), this input assignment is automatically set to the same HDMI IN. And in addition to the usual inputs (e. g. , COAXIAL1, COAXIAL2, etc. ), you can also select HDMI inputs. · Available sampling rate for PCM signals from a digital input (optical and coaxial) is 32/44. 1/48/88. 2/96 kHz/16, 20, 24 bit.
Component (Component Video Input)
Menu Component
If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign "IN2" to the "BD/DVD" input selector. Here are the default assignments.
Input selector BD/DVD VCR/DVR CBL/SAT GAME AUX TV/CD Default assignment IN1 ----IN2 -------------
En
35
Sp Config (Speaker Configuration)
Menu Sp Config
Some of the settings in this section are set automatically by Audyssey 2EQ® Room Correction and Speaker Setup ( page 24). Here you can check the settings made by Audyssey 2EQ Room Correction and Speaker Setup, or set them manually, which is useful if you change one of the connected speakers after using Audyssey 2EQ Room Correction and Speaker Setup. This section explains how to specify which speakers are connected and their sizes. For speakers with a cone diameter larger than 6-1/2 inches (16 cm), specify Large Cone diameter (full band). [. . . ] Connect the HDMI OUT jack to the HDMI input jack of the TV.
Blu-ray Disc/DVD player, etc.
HDMI connection AV receiver DIGITAL AUDIO connection (OPTICAL) HDMI connection
TV, projector, etc.
2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable.
Note · When the audio return channel (ARC) function is used with an ARC capable TV, this connection is not necessary ( page 42).
Confirm the settings. Turn off the power of the TV, and confirm that the power of the connected components is turned off automatically with the link operation. Start playback of the Blu-ray Disc/DVD player/recorder, and confirm the following. [. . . ]