User manual OPPO UDP203

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instruction in the literature accompanying the appliance. This label is located on the laser protective housing inside the product. install in accordance with the manufacturer’s instructions. [. . . ] Source Direct – Outputs at the original resolution of the source material. 52 S E T U P M E N U O P T I O N S NOTE • DO NOT set the Output Resolution to Custom unless you know your TV’s native resolution and the selected Custom Resolution is supported by your TV. For a detailed description on how to choose a proper output resolution, please refer to the Select the Best Output Resolution section on page 57 of this manual. There will be no video output or an “unsupported video signal” message may appear on screen if an unsupported output resolution is selected. To get the video back, you need to press the RESOLUTION button on OPPO remote until “AUTO” is displayed on the front panel of the UDP-205. Then press the Enter button on the OPPO remote or wait for a few seconds to confirm the selection. The player will automatically set its output resolution to a format that is supported by the TV. The Output Resolution will be automatically changed to Custom if a new custom resolution is selected here. The following resolutions are available for the Custom Resolution setting: • UHD Auto – Ultra HD (4K) output resolution with automatic frame rate. 50/60Hz source content will be output as 4K 50/60Hz if the display device supports it, or as 4K 25/30Hz in the user specified color space. UHD 24Hz – Ultra HD (4K) output resolution with a 24Hz frame rate whenever possible. If the source content is not suitable for 4K 24Hz output, the output resolution will be 1080p 50/60Hz. The frame rate will be 24Hz if the source content is natively 24Hz and the display device supports 1080p 24Hz. €¢ • • • • • NOTE • • DO NOT change the Custom Resolution unless you know your TV’s native resolution. There will be no video output or an “unsupported video signal” message may appear on screen if an unsupported custom resolution is selected. To get the video back, you need to press the RESOLUTION button on OPPO remote until “AUTO” is displayed on the front panel of the UDP-205. Then press the Enter button on the OPPO remote or wait for a few seconds to confirm the selection. The player will automatically set its output resolution to a format that is supported by the TV. Press and hold the RESOLUTION button on the OPPO remote for 3 seconds to reset the player’s Output Resolution, HDR, Color Space and Color Depth settings to their factory default settings. Color Space: Allows you to select the color space for the HDMI video output. €¢ Auto (default) – The player checks with the display device to automatically determine what color space to use. If the display device supports YCbCr 4:4:4, then it will be used to avoid extra color space conversion. [. . . ] Language: Three-character language code: ENG for English, FRA for French, and so on (ISO3166). Verbose Mode 3: UTC - Time Code Update: Sent every second when the playback time advances. To switch to a different type of time information, please refer to the STC command. Parameters: Title (3 digits), space, Chapter (3 digits), space, Type (1 chars), space, time (8 chars HH:MM:SS) Title: Current title number. [. . . ]