User manual OREGON SCIENTIFIC BAR636A

[. . . ] If the RF signal is weak, it can take up to 24 hours to get a valid RF signal reception. STRONG SIGNAL WEAK SIGNAL NO SIGNAL REMOTE SENSOR (THN122N) PRODUCT OVERVIEW FRONT VIEW SWITCH Channel OPTION Channel 1-3. If you are using more than one sensor, select a different channel for each sensor. To force a manual search for clock signals, press and hold for 2 seconds. If no signal is found, check the batteries. 1. LED status indicator 3. [. . . ] Extreme cold may temporarily reduce the effective range between the sensor and the base station. If the unit's performance fails due to low temperature, the unit will resume proper functioning as the temperature rises to within the normal temperature range (i. e. SET CLOCK / CALENDAR You only need to do this if you have disabled the atomic clock feature (for example, if you are too far from or cannot receive a signal). Select the time zone, hour, minute, year, month, day, or to and day of the week language. The time zone options are PA (Pacific), MO (Mountain), CE (Central) and EA (Eastern). The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. 1. 4. Wall mount hole RESET hole CHANNEL number (1-3) Battery compartment (Battery compartment cover not shown) GETTING STARTED BATTERIES Main unit Remote unit 3 x UM-3 (AA) 1. 5V batteries 2 x UM-4 (AAA) 1. 5V batteries SWITCH CLOCK DISPLAY Press MODE to toggle between Clock with Seconds and Clock with Weekday display. Insert batteries before first use, matching the polarity (+ and -) as shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit. NOTE It is recommended that you use alkaline batteries with this product for longer performance. Installing the batteries: ALARMS This product is equipped with a 2-minute crescendo alarm. VIEW ALARM SETTINGS DATA TRANSMISSION Data is sent from the sensor(s) every 40 seconds. The alarm time and alarm status will show in Press the Clock Area. SET ALARM 1. Battery compartment (cover off) ICON DESCRIPTION Main unit is searching for sensors. Channel 1 is selected (number will change depending on the sensor you select). Press to confirm. LCD DISPLAY ACTIVATE ALARM Press to activate or deactivate the alarm. shows in UNIT Main Remote LOCATION Indoor Temperature Area Outdoor Temperature Area the Clock / Alarm Area when the alarm is activated. SILENCE ALARM When the alarm time is reached, the crescendo alarm will sound for 2 minutes. To silence the alarm: SEARCH FOR SENSOR CHANGE SETTINGS To change, time, calendar and language settings: 1. To search for a sensor, press and hold MEMORY and CHANNEL (on the main unit) for 2 seconds. NOTE If the sensor is still not found, check the batteries, obstructions, and remote unit location. · Press SNOOZE to silence it for 8 minutes. OR · Press any key except SNOOZE to mute the alarm and activate it again after 24 hours. If no button is pressed, the alarm will automatically silence after 2 minutes. It will then sound again after 8 minutes. BAR636A_M_EN_V2. p65 1 2005. 7. 1, 9:44 AM WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius with 70 to 75 percent accuracy. The weather forecast is always displayed. · Remove the batteries if storing this product for a long period of time. [. . . ] The icon shows the selected sensor. KINETIC-WAVE ICON DESIGNATED DISPLAY Indoor Display Remote Display Channel 1 Remote Display Channel 2 Remote Display Channel 3 Data does not match main unit SPECIFICATIONS MAIN UNIT DIMENSIONS LxWxH 2. 7 x 1. 7 x 5. 6 inches (68. 8 x 44. 4 x 141. 7 mm) 4. 9 ounces (138 g ) without battery · · To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Press RESET when you change the batteries and whenever performance is not behaving as expected (for example, unable to establish radio frequency link with remote sensor or atomic clock). Hour format Calendar Alarm SAFETY AND CARE Clean the product with a slightly damp cloth and alcoholfree, mild detergent. POWER Main unit batteries Sensor batteries 3 x UM-3 (AA) 1. 5V 2 x UM-4 (AAA) 1. 5V WARNINGS This product is designed to give you years of service if handled properly. Oregon Scientific will not be responsible for any deviations in the usage of the device from those specified in the user instructions or any unapproved alterations or repairs of the product. [. . . ]