User manual OREGON SCIENTIFIC BAR816HG WIRELESS WEATHER STATION

[. . . ] 13 Set Daily Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1 Set Pre-Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Activate Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Snooze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Contact your local retailer for more information. ) The RTGR328N Sensor collects temperature and humidity readings, and signals from official time-keeping organizations for the radio-controlled clock. Most Areas have alternate display options (for example, Clock / Calendar). SWITCH Channel OPTION If you are using more than one sensor, select a different channel for each sensor. SWITCH Temp OPTION °C / °F · Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission. 5. To fold out the stand: NOTE The transmission range may vary and is subject to the receiving range of the main unit. You may need to experiment with various locations to get the best results. 1 SENSOR DATA TRANSMISSION 2 Data is sent from the sensor(s) every 60 seconds. The reception icon shown in the Temperature / Humidity Area indicates the status. (The number shows which sensor is selected. ) -- shows in Temp / Humidity Area The selected sensor cannot be found. Search for the sensor or check batteries. For best results: · · · · Insert the batteries and select the unit, channel, and radio signal format before you mount the sensor. Do not place the sensor more than 70 metres (230 feet) from the main (indoor) unit. Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects. · 10 SEARCH FOR SENSOR To search for a Thermo / Hygro sensor, press MODE to navigate to the Temperature / Humidity Area. NOTE If the sensor is still not found, check the batteries. Initial reception takes 2-10 minutes, and is initiated when you first set up the unit, and whenever you press RESET. The factors: · · icon shown in the Clock Area indicates 2 Connection between the main unit and the sensor that collects RF signals ( ) RF signal reception ( ) CLOCK AND CALENDAR This product tracks the time and date based on radiocontrolled signals from the RTGR328N remote sensor, or manual settings that you enter. How these signals work together: ICON MEANING The unit has contact with the sensor and has synchronized the time. The unit has contact with the sensor but the time has not been synchronized. RADIO-CONTROLLED CLOCK The time and date are automatically updated by radiocontrolled clock signals from official time-keeping organizations in Frankfurt (Germany) and Rugby (England) unless you disable this feature. The signals are collected by the remote sensor (RTGR328N) whenever it is within 1500 km (932 miles) of a signal. The unit has lost contact with the remote sensor but the time is synchronized. The unit has lost contact with the remote sensor and the time is not synchronized. 11 EN EN NOTE To force a manual search for RF clock reception, press and hold SEARCH on the sensor (RTGR328N) for 2 seconds. TURN RADIO-CONTROLLED CLOCK ON / OFF If you wish to manually set the clock, you must first disable the radio-controlled feature. To enable it, navigate to the Clock / Alarm Area, then press and hold for 2 seconds. [. . . ] 17 EN EN TROUBLESHOOTING PROBLEM Barometer Calendar SYMPTOM Strange readings Strange date / month Cannot adjust clock Cannot auto-synch REMEDY Set altitude / unit Change language SPECIFICATIONS Main Unit Dimensions LxWxH Weight 120 x 67 x 205 mm (4. 7 x 2. 6 x 8. 1 inches) 364 grams (12. 8 ounces) without battery Remote Unit Dimensions Disable radiocontrolled clock 1. Manually activate radiocontrolled clock LxWxH Weight 70 x 24. 5 x 116 mm (2. 76 x 0. 96 x 4. 57 inches) 108 grams (0. 24 lbs) without battery Clock Temperature Unit Indoor Range Outdoor Range Resolution Memory Relative Humidity Range Resolution Memory 18 25% to 95% 1% Min / max °C or °F -5 °C to 50 °C (23 °F to 122 °F) -20 °C to 60 °C (-4 °F to 140 °F) 0. 1 °C (0. 2° F) Min / Max Temp Shows "LLL" or "HHH" Cannot locate remote sensor Temperature is out-of-range Check batteries Remote sensor Barometer Unit Resolution Altitude Display mb / hPa or inHg 1 mb (0. 03 inHg) -100 to 2500 metres (-328 to 8202 feet) Sunny (day / night), partly cloudy (day / night), cloudy, rainy, snowy Alarm Snooze Power Main Unit Batteries Daily & Pre-Alarm; 2-minute crescendo 8-minute snooze 3 x UM-3 (AA) 1. 5V Thermo / Hygro Remote Unit Remote Unit (RTGR328N) RF frequency Range Transmission Channel No. Unit Radio-Controlled Clock Synchronization Clock display Hour format Calendar Auto or disabled HH:MM:SS 12hr AM/PM (MSF format) 24hr (DCF format) DD / MM or MM / DD; Day of the week in 1 of 5 languages (E, G, F, I, S) 433 MHz Up to 100 metres (328 feet) with no obstructions Approx. every 1 minute 1, 2, 3, 4 or 5 °C or °F NOTE It is recommended that you use alkaline batteries with this product for longer performance. [. . . ]